TT250N16KOFHPSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, referred to as SCRs for silicon controlled rectifiers, are a core component in the field of power electronics. A traditional SCR (Central Semikron SCR) is designed for economical AC switch control applications, but due to the progress of technologies, a new type of SCR called a modulecan now be used for more specialized applications. The TT250N16KOFHPSA1 is a 1,600 V, 250 A, 70 kHz, heatsink-mounted, insulated gate bipolar transistor (IGBT) module with Phase Angle Control (PAC) capability. It is a typically used to implement power controls in electrical drive systems, DC intermediate circuit converters, AC transmission systems, and AC rectifiers.

The TT250N16KOFHPSA1 is constructed using four switching IGBTs, four anti-parallel freewheeling diodes, and three thyristors. This allows the moduleto provide different operation modes depending on the application, such as phase control, phase angle control, "infinite" speed control, and start-stop control. The modulealso has an integrated control system that provides additional features, such as overvoltage protection, undervoltage protection, temperature sensing, and short circuit protection. In addition, the modulehas two current sensing resistors to help regulate current flow. This allows the moduleto perform with precision and accuracy.

This moduleuses a varying RMS gate voltage to maintain a desired output power. This RMS gate voltage is determined by the phase angle of the input current and the output power. When the input current has a phase angle less than 90 degrees, the RMS gate voltage is used to increase the load resistance, resulting in a decrease in output power. When the phase angle of the input current is greater than 90 degrees, the RMS gate voltage is used to reduce the load resistance, resulting in an increase in output power.

The TT250N16KOFHPSA1 is designed for use in applications where high power is required but low-power losses are desired. It is also designed for use in applications where both speed control and single-phase motor control are required. The modulecan be used in applications such as electric vehicle drive systems, inverter-based wind turbine converters, inverter-based variable frequency drives, and industrial variable frequency drives.

To ensure the best performance, the TT250N16KOFHPSA1 needs to be installed correctly and tested regularly. The moduleis relatively simple to install and quite reliable, but it is important to follow the manufacturer’s instructions to ensure the best performance. When testing the module, the following parameters should be measured: current, voltage, power, output frequency, input/output phase angle, temperature, and gate voltage.

In conclusion, the TT250N16KOFHPSA1 is a versatile, reliable power control modulethat can be used for a variety of applications. It is designed for applications where both speed control and single-phase motor control are required, and it features integrated control systems that provide additional protection features. The moduleis relatively easy to install and maintain, and its performance can be monitored with regular testing. With its range of features and capabilities, the TV250N16KOFHPSA1 is a great choice for any application that requires reliable, precise power control.

The specific data is subject to PDF, and the above content is for reference