TT600N16KOFHPSA2

Current - On State (It (AV)) (Max):	600A
Package / Case:	Module
Mounting Type:	Surface Mount
Operating Temperature:	125°C (TJ)
Current - Hold (Ih) (Max):	300mA
Current - Non Rep. Surge 50, 60Hz (Itsm):	--
Current - Gate Trigger (Igt) (Max):	250mA
Voltage - Gate Trigger (Vgt) (Max):	2V
Current - On State (It (RMS)) (Max):	1050A
Series:	--
Voltage - Off State:	1.6kV
Number of SCRs, Diodes:	2 SCRs
Structure:	Series Connection - All SCRs
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs - Modules

TT600N16KOFHPSA2 is a module that is specifically designed for industrial applications. It is a three terminal thyristor switch module integrated with zero current detect and trigger parts to provide maximum performance and efficiency. This module utilizes fast switching speed, high current capability, and a wide operating temperature range. TT600N16KOFHPSA2 is suitable for use in high-power devices and industrial applications, such as power converters, power supplies, variable speed drives, electronic traction controllers and rectifier application.

The TT600N16KOFHPSA2 module incorporates four thyristors. It is a 3-phase module and the total capacity of each phase is 200A at 400V. It is designed with a wide-band width control input of 0V to +5V and can be triggered by both AC and DC voltages. The on-state voltage drop of the module is 4V and the total capacitance of four thyristors is 0.6nF. This module is able to provide a maximum power dissipation of 1600W at 400V, 150A and 1kHz.

The Working Principle of TT600N16KOFHPSA2 is based on the principle of thyristor switch module. A thyristor switch module is an assembly of thyristors that are put together in order to form an electrical switch. These thyristors are basically conducting devices, which can be switch on by applying a voltage greater than the turn-on voltage. When the thyristors are turned on, they remain in an on-state until the control signal is reduced or removed. The turn-off time of the module is dependent on the time it takes for the current to decay.

The TT600N16KOFHPSA2 module has a high-frequency, linear, and wide-band control input of 0V to +5V for switching on the thyristors. It uses a zero current detect and trigger with built-in resistors and diode rectifiers. The zero current detect part is used to reduce power consumption and the trigger part is used to reduce values and turn-on the thyristors.

The TT600N16KOFHPSA2 is a well-suited solution for DC to AC conversion and DC to DC conversion applications, especially where high-power and high-currents are needed. It provides the end user with benefits such as higher efficiency, cost savings, and improved regulation. This module can also be used in traction power applications and AC motor drives, allowing the user to control the speed of the motor.

In conclusion, TT600N16KOFHPSA2 is a designed specifically for industrial applications and it offers high performance, efficiency, and reliability. It is able to produce a maximum power dissipation of 1600W at 400V, 150A, and 1kHz. It works on the principle of thyristor switch module and offers applications in DC to AC conversion and DC to DC conversion, as well as in AC motor drives.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description