TTETKLSANF-20.000000

Frequency Stability:	±280ppb
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.083" (2.10mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead Exposed Pad
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	3.5mA
Operating Temperature:	-40°C ~ 85°C
Series:	TT
Voltage - Supply:	3.3V
Output:	Clipped Sine Wave
Function:	--
Frequency:	20MHz
Type:	TCXO
Part Status:	Active
Packaging:	Cut Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

TTETKLSANF-20.000000 is an oscillator type of system used to measure frequencies. Oscillators are devices that provide a periodic signal, usually in the form of a sine wave, Square Wave, or some other type of waveform. They are often used in research, engineering, and calibration applications in order to accurately measure and record extremely specific properties of signals. This particular oscillator is used to measure the frequency of very specific signals that often have very low signal-to-noise ratios.

TTETKLSANF-20.000000 Application Field and Working Principle

The primary purpose of the TTETKLSANF-20.000000 is to accurately measure the frequency of extremely low signal-to-noise ratio signals in order to perform sensitive research applications. This includes signals from antennas and other such apparatus found in communications, military, aviation and industrial research. The oscillator is capable of measuring signals from 8 KHz to 20 MHz and is accurate to within 7 Hz.The oscillator is designed to be easy to use, with a built-in graphical interface that allows for quick and easy set up and configuration. The oscillator has three inputs allowing the user to input signals from multiple sources. Each input can be configured and adjusted individually to match the specific signal requirements.The oscillator works by measuring the frequency and amplitude of the incoming signal. The amplitude is measured by the analog voltage of the input signal, while the frequency is measured by the time interval between pulses. Once the signal has been sampled, the oscillator performs a series of calculations based on the frequency and amplitude of the input in order to determine the exact frequency of the signal.

Conclusion

Overall, the TTETKLSANF-20.000000 is a highly accurate and affordable oscillator suitable for measuring extremely low signal-to-noise ratio signals. It can measure frequencies from 8 KHz to 20 MHz, and is accurate to within 7 Hz. It is designed to be easy to use and has three inputs, allowing the user to send signals from multiple sources. It is the perfect choice for research projects, engineering applications, and any other situation where precision and accuracy is required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description