Allicdata Part #: | TUW15JR10E-ND |
Manufacturer Part#: |
TUW15JR10E |
Price: | $ 0.41 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 0.1 OHM 15W 5% AXIAL |
More Detail: | 100 mOhms ±5% 15W Through Hole Resistor Axial Flam... |
DataSheet: | TUW15JR10E Datasheet/PDF |
Quantity: | 1000 |
140 +: | $ 0.36756 |
Specifications
Series: | TUW |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 100 mOhms |
Tolerance: | ±5% |
Power (Watts): | 15W |
Composition: | Wirewound |
Features: | Flame Proof, Safety |
Temperature Coefficient: | ±400ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.492" x 0.453" Rectangular x 1.929" L (12.50mm x 11.50mm x 49.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through-Hole Resistors
Through-hole resistors are one of the most common types of resistors used in electrical and electronic circuits. A through-hole resistor is a component which has two terminals located on either side and which is designed to limit the flow of current between the two terminals. The most common through-hole resistor is the TUW15JR10E, which has a three-digit code (three numbers separated by a hyphen) that designates its resistance value.The TUW15JR10E is a fixed-value through-hole resistor, which means that it always has the same resistance value as designated by its three-digit code. The resistance of the TUW15JR10E is determined by its code; the first number is the most significant and represents the number of ohms (the unit of electrical resistance). The second number is the number of zeros that follow the first number, with the third number representing the number of zeros that follow the second number. For example, the code “150-0-75” would indicate a resistance of 150,000 ohms (or 150k ohms).The TUW15JR10E is a through-hole resistor, which means that it is designed to be mounted to a circuit board through a hole. The TUW15JR10E is typically soldered or mounted on to PC boards or breadboards. The TUW15JR10E is designed for general purpose applications and is suitable for use in both low frequency and high frequency applications.The TUW15JR10E has a power rating of 0.25 watts (250mW) and can handle voltages up to 10 volts. The standard tolerance for the TUW15JR10E is ±5%, with a temperature coefficient of ±100ppm/°C. It is available in a range of standard sizes, including 0603, 0805, 1206, 1808 and 1210.The TUW15JR10E is designed to provide protection for components and circuits in a range of applications. It is used to limit the current that flows through a circuit to prevent damage to components, as well as to reduce the effect of interference. It can also be used to prevent current surges by providing a path for excess current to be diverted. The TUW15JR10E can also be used to provide electrical isolation in circuits.In order to understand how the TUW15JR10E works, it is important to understand the basics of electrical resistance. Electrical resistance is a measure of how much opposition an electric current faces as it passes through a material. This resistance is determined by the material’s resistivity and its length. As current passes through a material, it encounters resistance which causes the current to decrease. The greater the resistance of the material, the more the current is reduced.The TUW15JR10E is designed using a specific resistivity and length ratio in order to provide a specific resistance value. This ratio is determined by the three-digit code, which indicates the resistance value of the component. When current passes through the component, it encounters the resistor’s specific resistance, which limits the current that is able to pass through. The resistance of the component can also be reduced by increasing the voltage applied to it, so that more current is able to pass through.The TUW15JR10E is an important component in a wide range of electronic applications. It is versatile and can be used in both low and high frequency applications. It is also designed to provide protection for components and circuits, as well as providing electrical isolation. With its standard power rating of 0.25 watts and its range of sizes, the TUW15JR10E is a reliable and cost-effective component for a range of applications.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "TUW1" Included word is 40
Part Number | Manufacturer | Price | Quantity | Description |
---|
TUW10J100E | Ohmite | 0.37 $ | 1000 | RES 100 OHM 10W 5% AXIAL1... |
TUW10J10RE | Ohmite | 0.37 $ | 1000 | RES 10 OHM 10W 5% AXIAL10... |
TUW10J150E | Ohmite | 0.37 $ | 1000 | RES 150 OHM 10W 5% AXIAL1... |
TUW10J1R0E | Ohmite | 0.37 $ | 1000 | RES 1 OHM 10W 5% AXIAL1 O... |
TUW10J1R5E | Ohmite | 0.37 $ | 1000 | RES 1.5 OHM 10W 5% AXIAL1... |
TUW10J20RE | Ohmite | 0.37 $ | 1000 | RES 20 OHM 10W 5% AXIAL20... |
TUW10J2R0E | Ohmite | 0.37 $ | 1000 | RES 2 OHM 10W 5% AXIAL2 O... |
TUW10J2R7E | Ohmite | 0.37 $ | 1000 | RES 2.7 OHM 10W 5% AXIAL2... |
TUW10J330E | Ohmite | 0.37 $ | 1000 | RES 330 OHM 10W 5% AXIAL3... |
TUW10J390E | Ohmite | 0.37 $ | 1000 | RES 390 OHM 10W 5% AXIAL3... |
TUW10J3R0E | Ohmite | 0.37 $ | 1000 | RES 3 OHM 10W 5% AXIAL3 O... |
TUW10J3R9E | Ohmite | 0.37 $ | 1000 | RES 3.9 OHM 10W 5% AXIAL3... |
TUW10J470E | Ohmite | 0.37 $ | 1000 | RES 470 OHM 10W 5% AXIAL4... |
TUW10J47RE | Ohmite | 0.37 $ | 1000 | RES 47 OHM 10W 5% AXIAL47... |
TUW10J4R3E | Ohmite | 0.37 $ | 1000 | RES 4.3 OHM 10W 5% AXIAL4... |
TUW10J4R7E | Ohmite | 0.37 $ | 1000 | RES 4.7 OHM 10W 5% AXIAL4... |
TUW10J56RE | Ohmite | 0.37 $ | 1000 | RES 56 OHM 10W 5% AXIAL56... |
TUW10J5R6E | Ohmite | 0.37 $ | 1000 | RES 5.6 OHM 10W 5% AXIAL5... |
TUW10J6R8E | Ohmite | 0.37 $ | 1000 | RES 6.8 OHM 10W 5% AXIAL6... |
TUW10J7R5E | Ohmite | 0.37 $ | 1000 | RES 7.5 OHM 10W 5% AXIAL7... |
TUW10J8R2E | Ohmite | 0.37 $ | 1000 | RES 8.2 OHM 10W 5% AXIAL8... |
TUW10JR10E | Ohmite | 0.37 $ | 1000 | RES 0.1 OHM 10W 5% AXIAL1... |
TUW10JR20E | Ohmite | 0.37 $ | 1000 | RES 0.2 OHM 10W 5% AXIAL2... |
TUW10JR30E | Ohmite | 0.37 $ | 1000 | RES 0.3 OHM 10W 5% AXIAL3... |
TUW10JR33E | Ohmite | 0.37 $ | 1000 | RES 0.33 OHM 10W 5% AXIAL... |
TUW10JR39E | Ohmite | 0.37 $ | 1000 | RES 0.39 OHM 10W 5% AXIAL... |
TUW10JR47E | Ohmite | 0.37 $ | 1000 | RES 0.47 OHM 10W 5% AXIAL... |
TUW10JR75E | Ohmite | 0.37 $ | 1000 | RES 0.75 OHM 10W 5% AXIAL... |
TUW10JR82E | Ohmite | 0.37 $ | 1000 | RES 0.82 OHM 10W 5% AXIAL... |
TUW15J100E | Ohmite | 0.41 $ | 1000 | RES 100 OHM 15W 5% AXIAL1... |
TUW15J10RE | Ohmite | 0.41 $ | 1000 | RES 10 OHM 15W 5% AXIAL10... |
TUW15J150E | Ohmite | 0.41 $ | 1000 | RES 150 OHM 15W 5% AXIAL1... |
TUW15J15RE | Ohmite | 0.41 $ | 1000 | RES 15 OHM 15W 5% AXIAL15... |
TUW15J1K0E | Ohmite | 0.41 $ | 1000 | RES 1K OHM 15W 5% AXIAL1 ... |
TUW15J1R0E | Ohmite | 0.41 $ | 1000 | RES 1 OHM 15W 5% AXIAL1 O... |
TUW15J1R5E | Ohmite | 0.41 $ | 1000 | RES 1.5 OHM 15W 5% AXIAL1... |
TUW15J200E | Ohmite | 0.41 $ | 1000 | RES 200 OHM 15W 5% AXIAL2... |
TUW15J20RE | Ohmite | 0.41 $ | 1000 | RES 20 OHM 15W 5% AXIAL20... |
TUW15J270E | Ohmite | 0.41 $ | 1000 | RES 270 OHM 15W 5% AXIAL2... |
TUW15J27RE | Ohmite | 0.41 $ | 1000 | RES 27 OHM 15W 5% AXIAL27... |
Latest Products
SQM700JB-68K
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
SQM700JB-1R3
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RNC60J24R9FSB14
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RWR89S2R80DRS70
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RNC60J7503FSB14
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RWR81S3400FSB12
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...