TW9910-LB2-GR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface technologies are designed to enable the transmission of information between different systems. As the rate of data transfer in systems increases, the need for better interface technology also increases. The TW9910-LB2-GR is a transmitter and receiver with the capability of encoding and decoding information to be transmitted and received.

The TW9910-LB2-GR is a compact, low-power solution capable of transmitting and receiving both UART and CAN bus signals. It has low power consumption and a wide operational temperature range. The receivers and transmitters are available in a variety of form factors, including surface mount, through-hole, and connectorized packages, allowing them to be used in various applications.

The TW9910-LB2-GR is well suited for applications requiring low data rate communication and low latency. It supports dual half-duplex connections with both asynchronous and synchronous transmission. Its maximum data rate is 3.125 Mbits per second.

The TW9910-LB2-GR has two types of inputs and outputs: a UART (Universal Asynchronous Receiver / Transmitter) and a CAN (Controller Area Network). The UART can be used for non-multiplexed data communications and transmits data on one line in an asynchronous mode. The CAN is a multiplexed communication protocol used for communication between electronic control units (ECUs) in vehicles. The CAN protocol uses two lines to transmit data in asynchronous or synchronous mode.

The TW9910-LB2-GR works by taking the input signal and encoding it. This encoded information can then be transmitted and then decoded by the receiver. The transmitter and receiver can be used in both synchronous and asynchronous modes. In asynchronous mode, the transmitted data is sent without a clock signal, and the receiver will decode the data independent from the clock. In synchronous mode, the transmitted data is sent at regular intervals with a clock signal and the receiver will decode the data based on the clock signal.

The TW9910-LB2-GR is also capable of converting different signals for compatibility with different devices. For example, a CAN message can be converted to a UART signal and vice versa. This allows devices to communicate over different systems.

The TW9910-LB2-GR is a reliable, cost-effective interface solution that is well suited to a wide range of applications. It supports both UART and CAN protocols and can handle data rates up to 3.125 Mbits per second. It is also capable of converting signals between different systems, allowing devices to communicate over different systems. The transmitter and receiver can be used in both synchronous and asynchronous modes.

The specific data is subject to PDF, and the above content is for reference