Allicdata Part #: | TWM10J1K0E-ND |
Manufacturer Part#: |
TWM10J1K0E |
Price: | $ 0.48 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 1K OHM 10W 5% RADIAL |
More Detail: | 1 kOhms ±5% 10W Through Hole Resistor Radial Flame... |
DataSheet: | TWM10J1K0E Datasheet/PDF |
Quantity: | 1000 |
300 +: | $ 0.43263 |
Series: | TWM |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 1 kOhms |
Tolerance: | ±5% |
Power (Watts): | 10W |
Composition: | Metal Oxide Film |
Features: | Flame Proof, Safety |
Temperature Coefficient: | ±350ppm/°C |
Operating Temperature: | -55°C ~ 275°C |
Package / Case: | Radial |
Supplier Device Package: | Radial Lead |
Size / Dimension: | 0.492" L x 0.354" W (12.50mm x 9.00mm) |
Height - Seated (Max): | 2.008" (51.00mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors are components that are designed to restrict the flow of electric current through them. They are typically made of metal or carbon and have a simple construction. They are commonly found in circuits where resistance is required in order to control certain electrical parameters such as voltage or current. The TWM10J1K0E resistor is a through hole resistor and is typically used in applications that require precise control of current flow.
The TWM10J1K0E resistor has a standard construction which consists of a resistive material which is covered by an aluminum oxide layer. This layer is used to reduce the parameters of the resistive material and increase the efficiency of the device. The device is connected to two terminals and one end of the resistor is connected to a ground terminal. A fixed resistance value is maintained by a plastic film, which is housed between the two terminals. This film prevents the shorting of the device and its resistance is maintained throughout its life. The TWM10J1K0E resistor is available in various sizes, from 0.01 ohms to 10k ohms, and is suitable for use in electronic circuits that operate at high frequencies.
The TWM10J1K0E resistor is primarily used in applications that require the control of current flow. For example, it is commonly used as part of an amplifier circuit to provide the bias voltage required in order to operate the amplifier. It is also used in radio frequency circuits where precise control of current is required in order to optimize the quality of the signal. Additionally, TWM10J1K0E resistors are used in low noise circuits such as those found in computer systems in order to reduce electrical interference.
The working principle of the TWM10J1K0E resistor is based on the fact that when a voltage is applied across it, a current flows through the material. This current will be determined by the material’s resistance and will flow in the direction of the voltage. This current will cause the device to heat up, and the heating generated will depend upon the amount of current that is flowing. As a result, the device will be limited to the amount of current it can handle, which will be determined by its resistance. This principle is the basis of all through hole resistors.
In summary, the TWM10J1K0E resistor is a through hole resistor that is typically used in applications that require precise control of current. It is available in a range of sizes, from 0.01 ohms to 10k ohms, and is suitable for use in high frequency and low noise circuits. Its working principle is based on the fact that when the voltage is applied across it, a current will flow through the material which is determined by its resistance. This resistance will determine the amount of current that the device can handle and the heat generated by the device.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TWM10J2K7E | Ohmite | 0.5 $ | 1000 | RES 2.7K OHM 10W 5% RADIA... |
TWM10J10KE | Ohmite | 0.48 $ | 1000 | RES 10K OHM 10W 5% RADIAL... |
TWM10J1K0E | Ohmite | 0.48 $ | 1000 | RES 1K OHM 10W 5% RADIAL1... |
TWM10J2K0E | Ohmite | 0.48 $ | 1000 | RES 2K OHM 10W 5% RADIAL2... |
TWM10J3K0E | Ohmite | 0.48 $ | 1000 | RES 3K OHM 10W 5% RADIAL3... |
TWM10J3K3E | Ohmite | 0.48 $ | 1000 | RES 3.3K OHM 10W 5% RADIA... |
TWM10J4K3E | Ohmite | 0.48 $ | 1000 | RES 4.3K OHM 10W 5% RADIA... |
TWM10J4K7E | Ohmite | 0.48 $ | 1000 | RES 4.7K OHM 10W 5% RADIA... |
TWM10J5K6E | Ohmite | 0.48 $ | 1000 | RES 5.6K OHM 10W 5% RADIA... |
TWM10J6K8E | Ohmite | 0.48 $ | 1000 | RES 6.8K OHM 10W 5% RADIA... |
TWM10J7K5E | Ohmite | 0.48 $ | 1000 | RES 7.5K OHM 10W 5% RADIA... |
TWM10J8K2E | Ohmite | 0.48 $ | 1000 | RES 8.2K OHM 10W 5% RADIA... |
TWM10J1K5E | Ohmite | 0.48 $ | 1000 | RES 1.5K OHM 10W 5% RADIA... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...