TX24-50R-LT-H1E

TX24-50R-LT-H1E Application Field and Working Principle

TX24-50R-LT-H1E connectors belong to a type of rectangular connectors known as Edge-type, Mezzanine (Board to Board) connectors. These connectors are used for flexible interconnects that require quick, reliable, and economical connections between two surfaces, often on a mezzanine board and a main circuit board. TX24-50R-LT-H1E connectors are compact, lightweight, and capable of efficient signal transfer.

Features and Benefits

The TX24-50R-LT-H1E connector provides some of the best features in its edge-type connector class. It is designed for high contact reliability and minimized resistance due to its compact gold-plated contacts and single row arrangement. The contacts are spring-loaded, providing a good electrical connection for a wide range of temperatures.The push-on, pull-off design of the TX24-50R-LT-H1E is also easy to connect and disconnect, with retention force and setup time kept to a minimum. It also provides a maximum of fifty contact points on either the male or female assemblies. The twinned male or female do away with the use of a common ground, thereby decreasing the potential issues associated with EMI or crosstalk.

Applications

The TX24-50R-LT-H1E connector is most suitable for serial buses (such as RS-232, RS-422, and RS-485), as well as signal distribution on mezzanine boards, embedded boards, and ATX card slots. It also acts as a convenience for interconnects requiring hot plugging or high currents.The TX24-50R-LT-H1E connector is an ideal solution for connection between two surfaces on boards with multiple circuits, as it requires only one connector where two might have previously been used, reducing the amount of wiring needed in the connector’s applicable applications.

Working Principle

The working principle of the TX24-50R-LT-H1E connector is quite simple. The Spring-loaded contacts ensure stable electrical contact without any soldering. The connector is designed for mating and unmating without soldering. It also has easy to use push on, pull off design.

The connector uses gold plating which offers good corrosion resistance. The gold plated contacts are designed to provide excellent electrical contact even in extreme temperatures and no contact force is required for a stable electrical contact. The contacts are capable of high-speed signal transmission and have low electrical noise.

The connector’s design also prevents crosstalk and EMI by utilizing twinned male or female contacts. The connector also features a standard 1mm spacing which ensures that the contact points are able to fit most boards with similar sized contact spacing.

Conclusion

The TX24-50R-LT-H1E connector is an ideal connector for most edge-type connector class applications. Its gold plated contacts are spring-loaded, which provide a reliable electrical connection and minimize resistance. The push-on, pull-off design makes it easy to connect and disconnect, while the twinned male or female contacts do away with the use of a common ground, thereby decreasing the potential issues associated with EMI or crosstalk. The TX24-50R-LT-H1E connector is a great choice for quick, reliable, and economical connections between two surfaces.