TXD2SA-L-9V-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal relays play a critical role in modern technology, and the TXD2SA-L-9V-3 is no exception. This device is a single-pole double-throw latching relay whose purpose is to serve as an electrical gateway or switch between two separate circuits. The relay is capable of handling currents up to 2 amperes, and is particularly well-suited for exacting applications where repeated reliability and precision are paramount.

The main feature of the TXD2SA-L-9V-3 is its latching contacts. Whereas non-latching relays merely switch between their two states, a latching relay is able to physically remain in its open or closed position with no current, providing instant operation. There are two basic hookup configurations possible with the TXD2SA-L-9V-3, and their functions and diagrams are described below.

• Normally Open (NO): In this configuration, the relay is designed to remain open until a momentary current flow is sent via its coil. When this happens, the relay’s switch contact moves to the closed position, and stays there until the current is removed. The closed switch contact then allows current to flow through the relay.

• Normally Closed (NC): This configuration is the opposite of the NO. In this scenario, when the current is applied to the coil, the relay’s switch contact moves to the open position, and current can no longer flow. In this case, the relay remains open until the current is removed. The schematic diagram for the TXD2SA-L-9V-3 shows the electrical connections necessary for the proper operation of the relay.

The TXD2SA-L-9V-3 is designed for high flexibility, and can be used for a variety of applications. Some of these include controlling low-power circuits such as low-voltage motors, solenoids, and lamps, and switching on and off higher-power applications such as pumps, heaters, or compressors. It is also used as a safety device in sensitive electronic equipment such as medical or scientific instruments.

As a single-pole double-throw relay, the TXD2SA-L-9V-3 can be set to any of four distinct states, as follows:

• 0:• NO: When there is no current connected to the relay, the contacts remain open in this configuration. This state is known as the NO, or open state, as no current is flowing through the relay.

• 1: NC: Again, when there is no current connected to the relay, the contacts remain closed in this configuration. This state is known as the NC, or closed state, and current is allowed to flow through the relay.

• 2:• NO: When current is connected to the relay, the contacts switch to the NO, or open state, and no current is allowed to flow.

• 3: NC: When the current is connected to the relay, the contacts switch to the NC, or closed state, and current is allowed to flow.

In addition to its adjustable switches, the TXD2SA-L-9V-3 also features robust mechanical and operational designs which allow it to operate for over 10 million cycles in ideal conditions. The relay is rated to withstand 5 VDC of voltage, with a maximum current handling capacity of 2 amperes. The coil is a Class B coil, meaning it reaches a nominal power rating of 2.2 W after one minute of energization.

In short, the TXD2SA-L-9V-3 relay is well suited for applications that require precise control and switching up to 2 amperes of current. Its latching contacts allow it to remain in any of the four possible states at any time, and its robust construction and durable design give it superior performance in demanding applications. From lamps and motors to pumps and compressors, the TXD2SA-L-9V-3 is an ideal choice for the most exacting of applications.

The specific data is subject to PDF, and the above content is for reference