TXS2SS-L2-1.5V-Z

Signal relays are devices that use a mechanical contact to close and open an electrical circuit. Signal relays are used to switch low power control signals between two or more circuits, often at different voltage levels. The TXS2SS-L2-1.5V-Z is a signal relay specifically designed for switching low current, up to 2 amps, with an operating voltage of 1.5 volts.

The TXS2SS-L2-1.5V-Z primarily consists of a contact box, diode and a coil. The contact box is where the mechanical contact takes place. When the coil is energized, current flows through the coil and creates a magnetic field. This magnetic field then attracts and moves an armature, which then causes the contact box to close the circuit.

The TXS2SS-L2-1.5V-Z is designed to operate in two different modes, latching mode and non-latching mode. In latching mode, the contact box is opened or closed depending on the signal that is applied to the coil. Once the coil is energized, it stays in that state until it is manually reset or the power is removed. The non-latching mode is similar, but the contact box will return to its original state when the coil is de-energized.

The TXS2SS-L2-1.5V-Z is designed for low current applications and is typically used in applications that require timing signals, level conversion, or signal isolation. This signal relay has a compact size, making it perfect for circuit board designs with limited space. It is also able to accommodate a wide range of voltages and currents and is perfect for general purpose signal relay applications.

In summary, the TXS2SS-L2-1.5V-Z is a small size signal relay that is designed for low current applications, up to 2 amps. It can be used for signal isolation, level conversion, and timing signals. This signal relay can operate in both latching and non-latching mode and is designed to be used in circuit board designs with limited space.