TYS3010470M-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors can refer to either electromechanical, electronic, or tunable components. As the name implies, they channel and store energy in the form of an electric current or magnetic field. Fixed inductors are important components for many applications, from AC/DC power supplies to electronic filters and oscillators. The TYS3010470M-10 is an example of a fixed inductor and this article will discuss its application field and working principle.

TYS3010470M-10 is a fixed electrical inductor with a diameter of 10 millimeters. It has a height of 4.5 millimeters and can hold up to 4.7uH (millihenries) of inductance. The device is a surface-mounted component and has an electrical resistance at the lowest end of the acceptable range, usually at 31.3 Ohm (omhs).

There are many applications for the TYS3010470M-10. It can be used in applications such as power supplies, filters, inductors, and antenna systems. It can also be used in circuit designs such as DC/DC converters, LED lighting, and high-speed signal line equipments. All of these applications require the inductor’s ability to store and control electricity or magnetic energy.

The working principle of the TYS3010470M-10 is based on the concept of Faraday’s law of induction. This law states that an electrical current in a conductor creates a magnetic field. This field can induce an electric current in an adjacent conductor. The induced electric current has the same direction and magnitude as the original electric current, however, the induced current has an opposite direction. Thus, the electric current will induce an opposite electric current in a conductor, which can store electrical energy.

In terms of the TYS3010470M-10, it has a copper wire wound around a ferrite core. This creates the magnetic field and a differential voltage is induced between two ends of the turns. This voltage is then combined with a stray capacitance between the turns to form an oscillator. The frequency of the oscillator depends on the elements that are used, such as inductance and stray capacitance. This allows the inductor to create and store an energy field suitable for various applications.

In conclusion, the TYS3010470M-10 is a fixed inductor that can be used in applications such as LED lighting, DC/DC converters, and antenna systems. The working principle of the device is based on Faraday’s law of induction and it is able to create and store an electric or magnetic field. All of these features make it an ideal component for many electrical engineering applications.

The specific data is subject to PDF, and the above content is for reference