TYS4020100M-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TYS4020100M-10 Fixed Inductors Application Field and Working Principle

TYS4020100M-10 Fixed Inductors are widely used in different kinds of applications and electronics. This specific type is a shielded surface-mount inductor, constructed with a ferrite core material and having a maximum DC resistance of 0.82ohms.

Introduction to Fixed Inductors

An inductor is an electrical component that stores energy in the form of a magnetic field. It consists of a coil of wire, usually made of copper or aluminum, wound around a core of magnetically permeable material such as ferrite. The rate at which the inductor stores energy is known as the inductance, measured in units of henrys. When current flows through the winding, a magnetic field is generated around the core; when the current is removed, the inductor releases its stored energy back into the circuit.

Application Field of TYS4020100M-10 Fixed Inductors

TYS4020100M-10 Fixed Inductors are typically used in applications where high current needs to be restricted, such as voltage regulation circuits, noise suppression, and signal transmission. They can also be used in applications involving DC-to-AC conversion, such as power supplies and inverters. With their low DC resistance and high current handling capabilities, these inductors are suitable for a wide range of applications. The inductors are particularly useful for applications such as motor control, where higher current is often desired.

Working Principle of TYS4020100M-10 Fixed Inductors

TYS4020100M-10 Fixed Inductors work by creating an electromagnetic field when current passes through the coil. This field stores energy, which is released back into the circuit when the current is removed. The inductance of the inductor is determined by the number of turns of wire, the size of the cross-sectional area of the core, and the material used for the core. The higher the inductance, the greater the amount of energy stored by the inductor.

The way that inductors store and release energy, as well as the manner in which they limit current in circuits, is different from the behavior of other passive components such as capacitors. When an inductor is placed in a circuit, the current passes through it in one direction. As the current increases, the inductor’s magnetic field grows, increasing its current limiting ability. Conversely, when the current decreases, the inductor releases its stored energy back into the circuit.

Conclusion

TYS4020100M-10 Fixed Inductors are essential components in a variety of electronic applications, from voltage regulation to motor control. By utilizing a core material such as ferrite and limiting current through control of the inductance of the inductor, they are able to store and release energy in a manner not achievable with other passive components. The versatile TYS4020100M-10 Fixed Inductors are perfect for use in any application where current needs to be regulated or limited.

The specific data is subject to PDF, and the above content is for reference