TYS60204R7N-10 Inductors, Coils, Chokes

DC Resistance (DCR):	58 mOhm Max
Height - Seated (Max):	0.087" (2.20mm)
Size / Dimension:	0.236" L x 0.236" W (6.00mm x 6.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	41MHz
Q @ Freq:	--
Series:	TYS6020
Shielding:	Shielded
Current - Saturation:	3A
Current Rating:	2A
Tolerance:	±30%
Inductance:	4.7µH
Material - Core:	--
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors Fixed inductors are electrical components that store energy in the form of magnetic energy in an inductive coil. They are also known as fixed inductors, chokes, and filter inductors. The inductor is a device used in many electrical circuits to provide both DC and AC voltage regulation, current stabilization, signal processing, and energy storage. Fixed inductors allow circuit designers to control input and output current through the use of inductive windings. The inductor consists of a coil of wire wound around a magnetic core. The inductance of the inductor is determined by the number of turns of the coil and the core material. A common type of fixed inductor is the air-core inductor. This type uses air or a vacuum as the core material, and the ability of the core to store magnetic energy is determined by the amount of wire on the coil.The TYS60204R7N-10 fixed inductors provide a high current rating in a small form factor. The inductor has an inductance of 10µH and a rated working current of 4.4A. It features a ferrite core with a high-saturation flux density and a flat-tip design that minimizes winding loss and reduces magnetic jump-ring noises at high frequency. The small size and high current rating make it ideal for use in a variety of applications, including power supplies and buck converters. TYS60204R7N-10 fixed inductors have a broad application field. They are used in a variety of power supply circuits, including regulators, linear regulators, and switching power supplies. They are also used in buck converters, DC-DC converters, and switching regulators. The inductors are also used in power supplies for cellular phones, LCD televisions, laptop computers, and other consumer electronics. The working principle of fixed inductors is rooted in the principles of magnetism and electromagnetism. When an alternating current is applied to an iron core, the current flow through the core creates a magnetic field. When the current flow changes direction, the polarity of the magnetic field reverses. The reversals of the magnetic field induces a voltage in the coil, which builds up and creates a magnetic field of opposite polarity. The inductance of the coil is determined by the number of turns of the coil and the magnetic field strength. The TYS60204R7N-10 fixed inductors use a flat tip design, which minimizes the number of turns and reduces winding loss due to the elimination of the overlapping turn. This design also reduces the magnetic jump-ring noise at high frequencies. The inductor has a ferrite core with a high-saturation flux density, which is capable of handling high currents while maintaining a low DCR and RF losses. The flat-tip design also improves PSRR and EMI characteristics. The TYS60204R7N-10 fixed inductors are a reliable and efficient solution for power supply, buck converter, and switching regulator applications. Their small form factor and high current rating make them ideal for use in consumer electronics, cellular phones, and other portable devices. The inductors also feature robust construction and reliable performance in applications where EMI and PSRR are important.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description