Allicdata Part #: | U2D-E3/5BT-ND |
Manufacturer Part#: |
U2D-E3/5BT |
Price: | $ 0.10 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE GEN PURP 200V 2A DO214AA |
More Detail: | Diode Standard 200V 2A Surface Mount DO-214AA (SMB... |
DataSheet: | U2D-E3/5BT Datasheet/PDF |
Quantity: | 1000 |
6400 +: | $ 0.08930 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 200V |
Current - Average Rectified (Io): | 2A |
Voltage - Forward (Vf) (Max) @ If: | 900mV @ 2A |
Speed: | Fast Recovery = 200mA (Io) |
Reverse Recovery Time (trr): | 27ns |
Current - Reverse Leakage @ Vr: | 10µA @ 200V |
Capacitance @ Vr, F: | -- |
Mounting Type: | Surface Mount |
Package / Case: | DO-214AA, SMB |
Supplier Device Package: | DO-214AA (SMB) |
Operating Temperature - Junction: | -55°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A U2D-E3/5BT rectifier is a one-piece double-side configuration semiconductor device that is used to convert alternating current (AC) power to direct current (DC) power. The single rectifier is made up of two pieces: an anode and a cathode. The U2D-E3/5BT rectifier can be used for a wide range of applications, including power conversion and rectification.
The U2D-E3/5BT rectifier uses a reverse current blocking mechanism to convert AC to DC power. It works by allowing the more positive side of the input signal to pass through the device, while blocking any current from flowing in the reverse direction. The single rectifier is capable of handling up to 35 amps of current, and can operate at frequencies up to 15KHz.
The U2D-E3/5BT rectifier is ideal for a variety of applications, particularly in power supplies and power conversion. It is capable of withstanding high surge currents and is able to operate at high frequency while still providing efficient power conversion.
The voltage levels that the U2D-E3/5BT rectifier will accept and output will vary depending on the application. The device is capable of operating at voltages up to 30 volts, but the output will be dependent on the voltage levels of the inputs. The device may also be used at lower input voltages, but special consideration must be taken in order to ensure the correct operation of the device.
The U2D-E3/5BT rectifier is also a popular choice for motor applications as it is able to provide clean DC power on both the positive and negative sides of the operating voltage. The U2D-E3/5BT rectifier can be used to drive electric motors, AC relays, and other inductive loads.
The U2D-E3/5BT rectifier is an excellent choice for rectifying AC power to DC power and providing efficient power conversion. Its efficient reverse current blocking mechanism, higher surge current handling, and higher frequency operation make it an ideal choice for applications involving power conversion and rectification.
The specific data is subject to PDF, and the above content is for reference
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...