UB20BCT-E3/4W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UB20BCT-E3/4W, a versatile component for a wide range of applications, is a 30V, 1A switching diode rectifier. Its low junction capacitance, fast reverse recovery time, and low peak forward voltage drop ensure high efficiency switching and make it ideal for use in applications such as power line rectification and regenerative or synchronous rectification. Additionally, its compact package makes it ideal for high-density printed circuit boards.

The device consists of two fast isolated anti-serial diodes with a common cathode. The two diodes are connected in parallel as a two-terminal bridge to provide a low-profile, low-impedance connection to the power source while still maintaining good heat dissipation properties. This improves the overall efficiency of the power system design. In addition, the two diodes can be configured individually to provide a variety of different logical switching combinations.

The working principle of the UB20BCT-E3/4W is fairly straightforward. When the positive or Drain of the rectifier is connected to the positive terminal of the power supply, the N-type avalanche diode is forward biased and current begins to flow. When the negative or Source of the rectifier is connected to the negative terminal of the supply, the P-type avalanche diode is forward biased and current flows in the opposite direction.

In either case, if the voltage applied is above the diode\'s breakdown voltage then it will conduct current until the applied circuit voltage drops below the diode\'s breakdown voltage. This allows current to flow in one direction only, reducing power supply losses. The high reverse breakdown voltage ensures that the diode will only conduct current when in the forward bias mode, and will switch off when the circuit reverses polarity.

The UB20BCT-E3/4W is an ideal component for use in a wide range of applications. It can be used as a single 1A rectifier in low power applications, or it can be combined with additional diodes to create a bridge rectifier. Since the two diodes are connected in parallel, they act as an in-line regulator and provide a consistent, reliable output. Moreover, the component\'s small size and low cost make it ideal for use in high-density printed circuit boards.

It can also be used for a variety of other applications, such as signal conditioning circuits, where it can be used to regulate any input voltage and make it suitable for a low-impedance load. Additionally, it can be used as a motor speed controller, as the two diodes can be connected in series for slow-speed switching or in parallel for higher speed changing. Furthermore, it can also be used for AC to DC rectification and as a power supply with its own internal regulator.

In summary, the UB20BCT-E3/4W is a versatile component which can be used in a wide range of applications. Its low junction capacitance, fast reverse recovery time, and low forward voltage drop make it an ideal choice for high efficiency switching. Furthermore, its compact package and low cost make it ideal for high-density printed circuit boards.

The specific data is subject to PDF, and the above content is for reference