UB3C-91RF8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are an essential component in many electrical devices used in everyday applications, and one of these is the UB3C-91RF8. This resistor is a three-terminal through hole device that can be used to design circuits where very specific values of resistance are required. It can be used in a variety of applications such as voltage dividers, current limiters, and voltage regulators.

The UB3C-91RF8 is a type of through hole resistor that is well suited for applications where precise resistive values are needed. It is constructed with a center pin, two end caps and a resistive element in between. The three terminals provide three different resistive values that can be connected in series or parallel to adjust the resistance of the device. The pins are connected with a soldering iron or a hot air gun and the device is then sealed in an environmentally sealed package to protect it from corrosion and temperature changes.

The UB3C-91RF8 is typically used for voltage dividers and current limiters. A voltage divider is a circuit where two resistors are connected in series to divide the input voltage into two output voltages. The UB3C-91RF8 is ideal for this application as it can be adjusted to the exact resistance needed to achieve the desired output voltage. Similarly, the UB3C-91RF8 can be used to limit the current in circuits. Current limits can be set to protect devices from short circuits and reduce energy consumption.

The working principle of the UB3C-91RF8 is based on the fact that it is made up of a resistive element and two terminal pins. When a voltage is applied across the resistive element, a current will flow through the element. The current is proportional to the resistance of the element. This is a linear relationship between resistance and current. If the resistance of the element is changed, then the current that flows through it will also change. Therefore, by adjusting the resistance of the UB3C-91RF8, it is possible to adjust the current that flows through it.

The UB3C-91RF8 is also used in voltage regulation. Voltage regulation is the process of ensuring that a constant voltage level is supplied to the load regardless of changes in the input voltage or the load current. The UB3C-91RF8 is ideal for this application as its resistance can be adjusted to provide a stable output voltage.

In summary, the UB3C-91RF8 is a three-terminal through-hole device that is well-suited for applications where precise resistive values are needed. Its working principle is based on the principle of Ohm\'s law, where the resistance of the device is proportional to the current that flows through it. The UB3C-91RF8 can be used in voltage dividers, current limiters, and for voltage regulation.

The specific data is subject to PDF, and the above content is for reference