UB5C-2K4F8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are specialized electronic components used in many electrical and electronic circuits. They are typically used to limit current or provide electrical stability. In many situations, the resistance of a resistor is a critical factor and must be chosen carefully to meet the design specifications.

One type of resistor is known as the UB5C-2K4F8. This type of resistor is a cylindrically shaped piece of metal with a ceramic dielectric material. The overall length of the device is usually 2.5 mm and inside the device is a resistance value. The most common range for this type of resistor is between 2.2k ohms and 4.8k ohms.

The UB5C-2K4F8 is commonly used in many electronic circuits. These can range from amplifiers and voltage regulators to motion sensors and power supplies. It is also useful in mixed signal applications such as digital to analog converters. The device may be surface mounted or through hole mounted, depending on the application requirements. It is also commonly used in medical applications and as part of safety systems.

The UB5C-2K4F8 works by providing a fixed resistance between two points in a circuit. When current passes through the resistor, some of the energy is lost. This loss is in the form of heat and it is proportional to the current running through the device. The resistor also bridges two different points of a single circuit, helping to keep the current from running unchecked and potentially causing damage.

The UB5C-2K4F8 is also used to provide impedance matching between two components. This is particularly important for audio and video signals where a low impedance signal is not compatible with a higher impedance device. By adding a resistor, the impedance of the signal can be matched and the signal can then be accepted by the other component.

Finally, the UB5C-2K4F8 can be used in feedback loops. Feedback loops are used to provide a signal back to the input of a circuit. This signal is then used to adjust the output according to the inputs. The resistor helps to limit the amount of current flowing through the feedback loop, preventing any damage.

As can be seen, the UB5C-2K4F8 is an important element in many different circuits and applications. It is used to protect against damage from excessive current, to match impedance levels, and to regulate signal levels, allowing the circuit to perform optimally.

The specific data is subject to PDF, and the above content is for reference