UC2841N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UC2841N is a member of the UC28xx family of DC-DC switching controllers. It is designed for controlling the output in linear or pulse-width modulation (PWM) modes with adjustable voltage regulation. The UC2841N is designed for use in on-the-fly voltage converters, high-efficiency DC-DC switching power supplies, AC-DC adapter circuits and other DC-DC control applications.

The UC2841N has several advanced features in addition to its voltage regulation and programmable oscillator capabilities. These features include thermal protection, external voltage fault monitor, and adjustable soft-start/stop functions. The thermal protection circuitry is designed to protect the device from excessive temperature and catastrophic faults, such as those caused by short circuit, overloaded transformer, etc. This protection prevents the device from being damaged in the event of an abnormal condition.

The UC2841N has an adjustable soft-start/stop function, which enables the device to gently start up and shut down during operation. This minimizes any possible output transients and reduces the energy consumed during start-up and shutdown. The external voltage fault monitor allows the user to detect fault conditions on the input voltage and shut down the device automatically.

The UC2841N is configured using an external resistor and capacitor. The resistor and capacitor are used to program the running frequency and to adjust the current limit. The external resistor also sets the pulse-width modulation frequency range. The external resistor and capacitor is connected to pins 1, 10 and 11 of the UC2841N.

The UC2841N also has an over-current protection (OCP) circuit that is activated by an external resistor. The external resistor sets the OCP trip level, which is multiplied by the on-chip current sense amplifier to provide the OCP trip point level. This OCP is used to protect the device from short circuit, overloaded transformer, and other catastrophic faults.

The UC2841N is capable of generating either linearly or pulse-width modulation (PWM) outputs. In linear mode, the output is set by the external resistor and capacitor and the output voltage is adjusted via an internal two-channel programmable voltage feedback loop. In PWM mode, the output voltage is controlled by a pulse-width modulated signal, which is generated using an on-chip oscillator and an external resistor and capacitor. This mode allows for high efficiency and stable operation with fast transient response.

The UC2841N is a versatile, high-performance DC-DC switching controller, suitable for use in a wide variety of applications. It is ideal for on-the-fly voltage converters, high-efficiency DC-DC switching power supplies, AC-DC adapter circuits and other DC-DC control applications. The UC2841N has advanced features, such as thermal protection, external voltage fault monitors, adjustable soft-start/stop functions, and adjustable pulse-width-modulated frequency and current limit. The UC2841N is a cost-effective solution for controlling the output of linear or pulse-width modulation (PWM) modes with adjustable voltage regulation.

The specific data is subject to PDF, and the above content is for reference