Allicdata Part #: | UDK2559B-T-ND |
Manufacturer Part#: |
UDK2559B-T |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Allegro MicroSystems, LLC |
Short Description: | IC DRIVER QUAD PROTECTED 16DIP |
More Detail: | N/A |
DataSheet: | UDK2559B-T Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | 4.75 V ~ 5.25 V |
Base Part Number: | UDK2559 |
Supplier Device Package: | 16-DIP |
Package / Case: | 16-PowerDIP (0.300", 7.62mm) |
Operating Temperature: | -40°C ~ 125°C (TA) |
Fault Protection: | Current Limiting (Fixed), Over Temperature |
Features: | -- |
Input Type: | Non-Inverting |
Rds On (Typ): | -- |
Current - Output (Max): | 700mA |
Series: | -- |
Voltage - Load: | 60V (Max) |
Interface: | On/Off |
Output Type: | Bipolar |
Output Configuration: | Low Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 4 |
Switch Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The UDK2559B-T is a power distribution switch, load driver and power gate driver in a single package. It is designed to be used in power systems where efficient power management is essential. The device is designed to replace multiple power distribution switches and provide greater efficiency and power savings.
The UDK2559B-T has two power supply rails connected to the load through an integrated N-channel MOSFET switch. The UDK2559B-T can operate with two supply voltages, one for the logic input and the other for switching power. The switching power rail can operate from a range of 6V to 30V and can be used to switch multiple loads from a single power source.
The integrated N-channel MOSFET switch is controlled by a logic input from the P-channel MOSFET driver. The logic input can be used to turn the switch on and off. The logic voltage level is adjustable to accommodate different logic control voltages. The P-channel MOSFET driver has additional protection and can be used to control multiple loads.
The UDK2559B-T also has built-in current limiting and thermal protection. The current limitation ensures that the switch is not over-loaded and the thermal protection ensures that the device does not overheat. The UDK2559B-T is designed to operate over a wide temperature range and is rated for up to 12A continuous operation.
The UDK2559B-T is a highly efficient and robust power management solution. It combines switch and power gate driver in a single package to reduce board space and provide an integrated power management solution for a wide range of power applications.
The UDK2559B-T is an ideal solution for power system designers who need an efficient, easy to use and robust power management solution. It is also a great choice for those looking for a cost effective alternative to conventional power switches.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
UDK2559B-T | Allegro Micr... | 0.0 $ | 1000 | IC DRIVER QUAD PROTECTED ... |
UDK2559EBTR-T | Allegro Micr... | -- | 1000 | IC DRIVER QUAD PROTECTED ... |
UDK2559LBTR-T | Allegro Micr... | 0.0 $ | 1000 | IC DRIVER QUAD PROTECTED ... |
UDK2559B | Allegro Micr... | 0.0 $ | 1000 | IC DRIVER QUAD PROTECTED ... |
UDK2559EB | Allegro Micr... | -- | 1000 | IC DRIVER QUAD PROTECTED ... |
UDK2559EBTR | Allegro Micr... | -- | 1000 | IC DRIVER QUAD PROTECTED ... |
UDK2559LB | Allegro Micr... | 0.0 $ | 1000 | IC DRIVER QUAD PROTECTED ... |
UDK2559LBTR | Allegro Micr... | 0.0 $ | 1000 | IC DRIVER QUAD PROTECTED ... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC