Allicdata Part #: | UG-274/U(48)-ND |
Manufacturer Part#: |
UG-274/U(48) |
Price: | $ 26.93 |
Product Category: | Uncategorized |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | CONN RF COAX ADAPT |
More Detail: | N/A |
DataSheet: | UG-274/U(48) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 24.47550 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The UG-274/U(48) is a connector commonly used in rf and microwave applications. It is designed to terminate coaxial cable, and is a robust, reliable, and widely distributed type of connector. The UG-274/U(48) has found itself in a wide range of applications from military radios, to commercial telecom, to various handheld instrumentation.
The dimensions of the UG-274/U(48) connector are significant. The nominal outer diameter of the cable that is mated is 0.090 inches, and the inner diameter of the connector is 0.15 inches. The operating frequency range for this type of connector rises to a maximum of 10 GHz. The impedance of the connector is 50 ohms. The connector is also known for its high current ratings, with maximum voltage rating of 1.9kV and a maximum current rating of 5A.
The UG-274/U(48) connector works by using the center conductor of the cable to conduct the signal to the connector. Inside the connector, the center conductor is connected to the main body of the connector via a pin-in-socket connection. This is referred to as the female side of the connector. On the opposite side of the connector, the center conductor is connected to a ferrule, which is then (via a clamp mechanism) connected to the outer braid of the cable. This is known as the male side of the connector.
In order to ensure proper operation, the mating procedure of the UG-274/U(48) must be strictly followed. The female side of the connector is first mated with the male portion, and then the ferrule of the male side of the connector is clamped onto the outer braid of the cable. A significant amount of force must be used to ensure the ferrule is clamped properly. Finally, the connector can be secured in place with the attachment screws.
The UG-274/U(48) connector has found many applications across various industries, from radio and cellular communications to medical equipment. Its robust design and high current and voltage ratings make it a suitable choice when dealing with high-power signals. Its wide frequency range and 50 ohm impedance also make it ideal for a variety of radio frequencies, from HF through to microwave.
The UG-274/U(48) is an integral part of many high-frequency communication systems and, with its robust design, reliability, and wide acceptance, will continue to be for years to come.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE