Allicdata Part #: | UG-491/U(41)-ND |
Manufacturer Part#: |
UG-491/U(41) |
Price: | $ 31.03 |
Product Category: | Uncategorized |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | CONN RF COAX ADAPT |
More Detail: | N/A |
DataSheet: | UG-491/U(41) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 28.20510 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
UG-491/U(41) is a brand of coupled-transistor integrated circuit which has a wide range of potential applications, ranging from routing and switching functions in telecommunication and data processing to signal amplification and conditioning in radio frequency (RF) and other analog circuit applications. The UG-491/U(41) contains two transistors — a PNP and NPN — of which the collector and base pins are connected together. In addition, the emitter pins are also connected, and the integrated circuit also contains resistors and other components. This section provides information on the application field and working principle of UG-491/U(41).
The UG-491/U(41) is often used in applications which require amplification, switching, and signal conditioning. For example, in RF applications, the device can be used to amplify signals, switch between the transmit and receive paths, and condition the signals for better performance. In data-processing, UG-491/U(41) can be used as a high-speed analog switch, to route data between different components of the system. In telecom applications, the device can be used as a multiplexer, to switch between different telephone lines and enable the proper connection of multiple calls. In all these applications, the UG-491/U(41) offers high reliability and very low power consumption.
The working principle of the UG-491/U(41) is based on the fact that the two transistors share a common emitter node. When a voltage is applied to one of the base pins, the current in the emitter node changes accordingly. This effect is used to amplify signals or switch between transmit/receive paths. The device also has internal feedback paths, which allow to stabilize and maintain a certain level of gain. Thus, the device can be used not only as amplifier but also as a signal conditioner, providing a uniform gain over its operating frequency range.
In addition to its main applications in the aforementioned fields, UG-491/U(41) can also be applied to implement complex logic functions, such as AND/OR/NOR. The complex logic functions can be implemented by connecting special feedback paths between the base pins. This makes the device very versatile, and it can be used in a wide variety of applications. In fact, it is known to be used in the design of high-speed arithmetic logic units.
UG-491/U(41) is a well-known integrated circuit with a variety of potential applications. Its two transistors share a common emitter node, and the device also has internal feedback paths which allows it to be used as amplifier, signal conditioner, or logic control. It is very reliable and has very low power consumption, making it well-suited for many different application scenarios.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE