UJA1079ATW/3V3/WD,

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface is a medium to connect two systems, subsystems or devices, which communicate with each other. Specialized interface is when customization is needed for specific applications, built upon a combination of standard, off-the-shelf components. One example of a specialized interface is the UJA1079ATW/3V3/WD, a three-channel interface that is designed for automotive applications.

The UJA1079ATW/3V3/WD is a multi-channel CAN transceiver from STMicroelectronics that supports three CAN FD (Flexible Data-rate) controllers. It supports data communication between microcontrollers and other automotive ECUs that are connected via a CAN bus. It provides an I/O isolated CAN interface with a data rate of up to 8Mbits/s, and is available in two package types: SOIC-14 and VFQFN-14.

This specialized interface’s main application field is the automotive industry, where it is used to extend the capabilities of the common mode CAN FD channels in the multiplexing environment. It features an ESD protection of up to ± 8kV according to the IEC/EN 60747-5-2, and a surge immunity rating of up to 6V according to the ISO/PAS11801-2 specifications. The widespread usage of this transceiver confirms its robustness and reliability in harsh environments, in order to ensure that communication between ECUs is ensured and running smoothly.

The UJA1079ATW/3V3/WD works on a dedicated three-channel CAN FD protocol based on a data rate of up to 8Mbits/s. This protocol creates multiple timeslots for data exchange between connected devices by utilizing a time-triggered arbitration strategy. The protocol consists of two segments, the arbitration and data, with different phases for each. The arbitration phase is responsible for the identification of the sender and recipient, while the data phase is responsible for the exchange of the actual data.

During arbitration, each of the three CAN FD channels send out a signal with a unique identifier. The recipient device will then send a signal acknowledging the signal with the same identifier, confirming that its signal has been recognized and accepted. Then, the recipient device will initiate the data phase, in which it will send the requested data to the sender device through the data phase. This process will go on until all messages are successfully sent. The UJA1079ATW/3V3/WD will then make sure that the data is accurate and valid, verifying the integrity of the data.

The UJA1079ATW/3V3/WD is a reliable and highly efficient specialized interface. Its main application field is automotive, where it is used to extend the capabilities of the common mode CAN FD channels in the multiplexing environment. It works on a dedicated three-channel CAN FD protocol based on a data rate of up to 8Mbits/s and utilizes a time-triggered arbitration strategy to create multiple timeslots for data exchanges between connected devices. Thanks to its robustness and reliability, it ensures that communication between ECUs is ensured and running smoothly, while keeping the data it transmits secure from ESD and surge.

The specific data is subject to PDF, and the above content is for reference