UMS-1800-A16-G

Voltage controlled oscillators (VCOs) are used in many applications to generate sinusoidal and/or rectangular signals in order to control and monitor electrical motors, communications systems and process control. The UMS-1800-A16-G is an example of a voltage controlled oscillator (VCO) and it is used in many applications like communication, avionics and computer applications.

The UMS-1800-A16-G is a voltage controlled oscillator that is capable of providing high frequency stability, long-term frequency hold, wide frequency range and fast frequency response. It has a wide frequency range of 133 MHz to 1.8 GHz, with an adjustable output tuning of 0.1 MHz, with a temperature coefficient of 1.2 ppm/°C. Its frequency range is controlled by a control voltage from 0 to 5 volts, and the control voltage range is 4 Hz/V. The input power is less than 0.3 watts and the output power can be tuned from 0 to -4 dBm.

The applications of the UMS-1800-A16-G are mainly in communication, avionics and computer systems. In communications, it is used to generate and amplify signals in high frequency radio, television and other audio and communication systems. This VCO can be used to generate, modulate and transmit broadband signals for wireless communications, satellite systems and wireless location services. In avionics, it is used to generate timing signals for flight control systems and to stabilize aircraft navigation system. For computer applications, it is used to generate high frequency clock signals for clock synthesizer and for timing signals for microprocessors.

The principle of the UMS-1800-A16-G is based on the fact that when voltage is applied to a resonant circuit, it causes the circuit to oscillate at a frequency proportional to the applied voltage. The resonance frequency of a circuit is modified by adding or subtracting an amount of energy to or from the circuit, which alters the inductance or capacitance and thus can be controlled by an external voltage. The UMS-1800-A16-G is a VCO that uses this principle to produce an adjustable frequency and amplitude output signal, which is determined by the applied control voltage.

The UMS-1800-A16-G can be used in many applications, as described above. It has a wide frequency range and is able to deliver signals of high frequency stability, long-term frequency hold, wide frequency range and fast frequency response. This VCO also has a low power consumption and low cost, which makes it a good choice for many applications. By continuously adjusting the control voltage, the frequency output can be changed as needed, as well as the amplitude of the signal.