UPC8215TU-E2-A RF/IF and RFID |
|
Allicdata Part #: | UPC8215TU-E2-ACT-ND |
Manufacturer Part#: |
UPC8215TU-E2-A |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | CEL |
Short Description: | IC AMP LOW NOISE 8-MINIMOLD |
More Detail: | RF Amplifier IC GPS 1575.42MHz 8-MINIMOLD |
DataSheet: | UPC8215TU-E2-A Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Cut Tape (CT) |
Part Status: | Obsolete |
Frequency: | 1575.42MHz |
P1dB: | 5dBm |
Gain: | 24dB ~ 30dB |
Noise Figure: | 1.3dB ~ 1.5dB |
RF Type: | GPS |
Voltage - Supply: | 2.7 V ~ 3.3 V |
Current - Supply: | 10mA ~ 13mA |
Test Frequency: | 1575.42MHz |
Package / Case: | 8-SMD, Flat Lead Exposed Pad |
Supplier Device Package: | 8-MINIMOLD |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A RF amplifier is a two-port electronic device used to amplify a radio frequency (RF) signal by adding power from an external energy source. The amplifier may be designed as a stand-alone component, or as part of an integrated circuit. The UPC8215TU-E2-A is an RF amplifier specifically created for wide bandwidth applications. It offers high gain for a wide range of signal frequencies and is designed to operate efficiently under certain conditions. The amplifier\'s application field and working principles are discussed in further detail below.
Application field
The UPC8215TU-E2-A amplifier is designed for use in 5G and 4G networks, as well as other wireless communications applications. It has a wide operating bandwidth of up to 6GHz, making it an ideal solution for use in high-speed, large-bandwidth applications. Furthermore, the amplifier is designed for use in demanding 5G NR, LTE, and edge-cloud applications. It has a high linearity across the entire frequency response and delivers superior gain and output power for these applications.
Working Principle
At its most basic, the UPC8215TU-E2-A is a two-port transimpedance amplifier. It works by converting input voltage into current, which is then amplified. This is accomplished by using two transistors in cascade configuration, where the output of the first transistor is connected to the input of the second, and the output of the second transistor is fed back to the input of the first transistor. This feedback loop creates a negative feedback effect that provides the necessary gain and stability for the amplifier.
When a signal is applied to the UPC8215TU-E2-A amplifier, the input signal is amplified by the first transistor, and the output of the second transistor is fed back to the input of the first transistor. The negative feedback loop ensures stability and gain for the amplifier. The output of the amplifier is then fed to the external circuit, which can further amplify the signal.
In addition to providing gain and stability, the UPC8215TU-E2-A also offers a wide bandwidth of operation and a high linearity over the entire frequency range. The amplifier is designed to operate over a wide range of input frequencies, providing a quality signal output regardless of the signal frequency. Furthermore, it is designed to work efficiently under certain conditions, such as temperature and power supply voltage, ensuring reliability and consistency.
Conclusion
The UPC8215TU-E2-A is a wide-bandwidth amplifier specifically designed for applications in 5G and 4G networks, as well as other applications. It offers high gain across a wide range of frequencies and has a high linearity across the entire frequency response. The amplifier operates efficiently under certain conditions and is designed to provide consistent, reliable amplification for a wide range of applications. The application field and working principle of the UPC8215TU-E2-A amplifier have been discussed in this article, and it is clear that the amplifier is an ideal choice for wide bandwidth applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
UPC8172TB-E3-A | CEL | -- | 1000 | IC MIXER 50-400MHZ UP CON... |
UPC8211TK-E2-A | CEL | -- | 1000 | IC AMP LOW NOISE 6-MINIMO... |
UPC8215TU-E2-A | CEL | -- | 1000 | IC AMP LOW NOISE 8-MINIMO... |
UPC8236T6N-E2-A | CEL | -- | 1000 | IC AMPLIFIER GPS 6-TSONRF... |
UPC8240T6N-E2-A | CEL | 0.0 $ | 1000 | IC AMPLIFIER GPS 6-TSONRF... |
UPC8112TB-EVAL | CEL | 0.0 $ | 1000 | EVAL BOARD FOR UPC8112TB |
UPC8163TB-EV19 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8163TB 1.9G... |
UPC8179TB-EV09 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8179TB 900M... |
UPC8179TK-EV24 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8179TK 2.4G... |
UPC8211TK-EV04 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8211TK 400M... |
UPC8211TK-EV09 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8211TK 900M... |
UPC8211TK-EV24 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8211TK 2.4G... |
UPC8172TB-EV19 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8172TB 1.9G... |
UPC8187TB-EV08 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8187TB 800M... |
UPC8204TK-EV19 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8204TK 1.9G... |
UPC8211TK-EV15 | CEL | 0.0 $ | 1000 | EVAL BOARD UPC8211TK 1.5G... |
UPC8232T5N-A | CEL | 0.0 $ | 1000 | IC SIGE LNA 6 TSONRF Ampl... |
UPC8232T5N-E2-A | CEL | -- | 1000 | IC AMPLIFIER GPS 6-TSONRF... |
UPC8204TK-A | CEL | 0.0 $ | 1000 | IC AMP VAR GAIN 6-MINIMOL... |
UPC8178TB-A | CEL | 0.0 $ | 1000 | IC AMPLIFIER LOW CURRENT ... |
UPC8178TB-E3-A | CEL | 0.0 $ | 1000 | IC AMPLIFIER LOW CURRENT ... |
UPC8178TK-A | CEL | 0.0 $ | 1000 | IC MMIC AMPLIFIER 6-MINIR... |
UPC8178TK-E2-A | CEL | 0.0 $ | 1000 | IC MMIC AMPLIFIER 6-MINIR... |
UPC8179TB-A | CEL | 0.0 $ | 1000 | IC AMPLIFIER LOW CURRENT ... |
UPC8179TB-E3-A | CEL | -- | 1000 | IC AMPLIFIER LOW CURRENT ... |
UPC8179TK-A | CEL | 0.0 $ | 1000 | IC MMIC AMP 6-MINIMOLDRF ... |
UPC8179TK-E2-A | CEL | -- | 1000 | IC MMIC AMP 6-MINIMOLDRF ... |
UPC8204TK-E2-A | CEL | 0.0 $ | 1000 | IC AMP VAR GAIN 6-MINIMOL... |
UPC8215TU-A | CEL | 0.0 $ | 1000 | IC AMP LOW NOISE 8-MINIMO... |
UPC8191K-A | CEL | 0.0 $ | 1000 | IC I/Q MODULATOR AGC 20-Q... |
UPC8191K-E1-A | CEL | 0.0 $ | 1000 | IC I/Q MODULATOR AGC 20-Q... |
UPC8195K-A | CEL | 0.0 $ | 1000 | IC I/Q MODULATOR AGC 20-Q... |
UPC8195K-E1-A | CEL | 0.0 $ | 1000 | IC I/Q MODULATOR AGC 20-Q... |
UPC8190K-A | CEL | 0.0 $ | 1000 | IC I/Q DEMOD AGC 20-QFNRF... |
UPC8190K-E1-A | CEL | 0.0 $ | 1000 | IC I/Q DEMOD AGC 20-QFNRF... |
UPC8194K-A | CEL | 0.0 $ | 1000 | IC I/Q DEMOD AGC 20-QFNRF... |
UPC8194K-E1-A | CEL | 0.0 $ | 1000 | IC I/Q DEMOD AGC 20-QFNRF... |
UPC8172TB-A | CEL | 0.0 $ | 1000 | IC MIXER 50-400MHZ UP CON... |
UPC8106TB-A | CEL | 0.0 $ | 1000 | IC MIXER 400MHZ-2.5GHZ UP... |
UPC8106TB-E3-A | CEL | -- | 1000 | IC MIXER 400MHZ-2.5GHZ UP... |
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...