Series:	*
Part Status:	Active
Lead Free Status / RoHS Status:	--
Moisture Sensitivity Level (MSL):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

US79KUA-AAA-001-SP Application Field and Working Principle

Introduction

The US79KUA-AAA-001-SP is a motor driver, controller, and line protection enclosure from STMicroelectronics. This product is designed for motor control applications and is used for controlling DC motors of up to 10A power and 12V/24V voltage. This device features a wide range of features, including programmable current limit and over temperature protection. Furthermore, US79KUA-AAA-001-SP includes a diagnostic status input to monitor a wide range of specific conditions such as overload, open wire, or short circuit conditions.

Application Field

The US79KUA-AAA-001-SP motor driver and controller from STMicroelectronics is designed for motor control applications and can support a wide range of applications. These applications range from Electrical vehicles (EVs) and Hybrid Electrical Vehicles (HEVs) to industrial motors and precision robotics. The US79KUA-AAA-001-SP is well suited for application in EVs and HEVs, as it includes an integrated fault diagnosis and current limit functions. This allows for a rapid current cut off to prevent accidental or permanent damage in case of a short or overload. The US79KUA-AAA-001-SP also supports fast-charging applications due to its wide input voltage range, and is supported by most of the state-of-the-art EV charging equipment. The US79KUA-AAA-001-SP is also ideal for industrial motors and robotic applications due to its fast switching speed and current protection capability. By incorporating the US79KUA-AAA-001-SP in industrial motor and robot designs, developers can benefit from improved reliability, reduced size, and improved protection features over traditional motor drivers.

Working Principle

The US79KUA-AAA-001-SP motor driver and controller from STMicroelectronics utilizes a digital current monitoring system to implement its current limit, over temperature protection, and diagnostic status input features. This system comprises of an operational amplifier (op-amp) and a digital signal processor (DSP), which enable the motor driver to detect load variations, safety issues, and over temperature conditions.The current limit feature of the US79KUA-AAA-001-SP can be programmed to allow a maximum current within the desired range. This current is measured by the op-amp, which reacts to any increase in the current. The op-amp sends a signal to the DSP, which then activates the current limit feature and cuts off the current if it exceeds the programmed limit. This feature helps to prevent the development of dangerous faults or damages in the motor.The US79KUA-AAA-001-SP also implements a diode temperature monitoring system to detect over temperature conditions. This feature works by measuring the diode temperature from the rectifier diode in the motor, as the diode tends to emit more heat when under load. The DSP will then compare the temperature reading against the programmed temperature limit, and shut off the power if the temperature exceeds the limit. Furthermore, the US79KUA-AAA-001-SP utilizes a diagnostic status input to detect any potential faults in the motor such as overload, open wire, or short circuit conditions. The DSP will then assess the situation and activate the over current safety feature, shut off the motor to prevent damaging the motor further.

Conclusion

The US79KUA-AAA-001-SP motor driver and controller from STMicroelectronics is an ideal choice for controlling DC motors of up to 10A power and 12V/24V voltage. This product supports a wide range of applications, including vehicles, industrial motors and precision robotics. Moreover, US79KUA-AAA-001-SP includes a range of features such as programmable current limit, over temperature protection, and diagnostic status input. Through the utilization of its operational amplifier and digital signal processor, the US79KUA-AAA-001-SP is able to detect load variations, safety issues, and over temperature conditions. Finally, the US79KUA-AAA-001-SP provides a comprehensive protection feature to prevent any accidental or permanent damage in the motor due to overload or short circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description