USF340-10.0K-0.01%-5PPM

Series:	USF
Packaging:	Bulk
Part Status:	Active
Resistance:	10 kOhms
Tolerance:	±0.01%
Power (Watts):	0.333W, 1/3W
Composition:	Thick Film
Features:	--
Temperature Coefficient:	±5ppm/°C
Operating Temperature:	-40°C ~ 85°C
Package / Case:	Radial
Supplier Device Package:	--
Size / Dimension:	0.750" L x 0.075" W (19.05mm x 1.91mm)
Height - Seated (Max):	0.395" (10.04mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through hole resistors are one of the earliest passive components invented, and they are among the most common electronic components used in circuits. They are widely used in electrical and electronic circuits to limit the flow of current and to help maintain constant voltage levels for device protection. Through hole resistors are constructed from a combination of a resistance element and two metal wires, known as the lead wires, that are connected to the resistance element.

USF340-10.0K-0.01%-5PPM

The USF340-10.0K-0.01%-5PPM is a through-hole resistor manufactured by Vishay Dale and is available in three different power packages. These resistors are one of the most commonly used resistors in the electronics industry. They are able to operate in a wide range of temperatures, ranging from -55°C to +125°C, and are available in a wide variety of resistance (1 Ohm to 1 meg Ohm) and tolerance values (0.01%, 0.1%, and 1%).The USF340-10.0K-0.01%-5PPM resistor is constructed with a metal film element encapsulated in a ceramic case with a gold-plated, metalized end caps. This provides better immunity to temperature fluctuations and a high degree of reliability. It also has a low voltage coefficient and good stability over temperature.

Application Fields

The USFC340-10.0K-0.01%-5PPM resistor is most often used in applications that require tight accuracy and minimal temperature drift. It can be used as a current-limiting resistor in power supply circuits, voltage-based sensing circuits, time-delay circuits, and high speed logic circuits. It can also be used in consumer electronic products such as televisions, watches, audio devices, and computers.The USF340-10.0K-0.01%-5PPM resistor is also widely used in applications where high precision resistive measurements are required. Measurement circuitries, pulsers, RF systems, and filter circuits often incorporate this particular resistor.

Working Principle

The working principle of the USF340-10.0K-0.01%-5PPM resistor is based on Ohm\'s law, which states that the current through a conducting medium is directly proportional to the applied voltage. As the applied voltage increases, the current through the resistor increases, and the applied voltage is limited by the overall resistance of the resistor. The working principle of the resistor also determines the power dissipation of the resistor. As the applied voltage increases, the power dissipated in the resistor also increases. The USF340-10.0K-0.01%-5PPM resistor has a power rating of 1 W, so it should not be used in circuits where the power dissipation is expected to exceed 1 W.

Conclusion

The USF340-10.0K-0.01%-5PPM is a widely used through hole resistor manufactured by Vishay Dale. This resistor is available in three different power packages and is designed to have a wide temperature range, low voltage coefficient, and high stability over temperature. It is often used in applications that require tight accuracy and minimal temperature drift. The working principle of the resistor is based on Ohm’s law, and it is rated for a maximum power dissipation of 1 W.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description