USR2G-100RX2

USR2G-100RX2 falls under the category of through-hole resistors. Through-hole resistors are components that consist of a wire or rod of resistive material that has either one or two terminals on it. They are typically trimmer or variable potentiometer types which allow adjustment of the resistance. Through-hole resistors have some key characteristics that make them an attractive solution when aiming to reduce unwanted electrical interference in circuits. For example, they typically have small parasitic inductance and capacitance values, and better power dissipation, which helps reduce unwanted noise. The higher the impedance, the better they can reduce noise. They are also able to carry high voltage, making them ideal for applications where high peak power is expected. For USR2G-100RX2, the resistance range is between 2Ω to 100kΩ. This range makes it suitable for a variety of applications, from electronic hobbyists to industrial operations where precise adjustment of current is critical in working environments. The USR2G-100RX2 operates using the potentiometer effect. This is the mechanism by which the resistance across two terminals of a potential divider is altered by adjusting the third terminal, which is the variable resistor. The ratio of the voltage across each resistor can be determined by the voltage applied to the variable resistor. This creates a circuit that can suit the needs of many different applications, as the individual resistance can be tailored for accuracy.For example, USR2G-100RX2 is used for preset voltage, current, resistance in power supplies and electric appliances. It can also be used as a rheostat, a two-terminal device, to regulate a current. This is beneficial in many applications as it allows the user to have precise control over the output current. The specified factory-preset values give a better accuracy than a manually adjusted resistance.The USR2G-100RX2 is also suitable for high-frequency applications, such as radio-frequency circuits in communication systems. In these circuits, the resistance needs to be high enough to prevent frequencies beyond the technical range from entering the circuit. Moreover, USR2G-100RX2 can be used in error correction circuitry. These circuits require stability and precise adjustment of resistance, and the variable resistor can be used to accurately adjust the desired resistance. Because of its versatility, the USR2G-100RX2 is a common resistor choice for industrial, automotive, and consumer electronics applications. Its low cost, high performance, and wide range of variables make it an excellent choice for noise and interference suppression as well as error correction.

USR2G-5KX1	Riedon	11.59 $	4	RES 5K OHM 0.6W 0.01% RAD...
USR2G-1KX2	Riedon	11.59 $	983	RES 1K OHM 0.6W 0.01% RAD...
USR2G-250RX1	Riedon	11.59 $	129	RES 250 OHM 0.6W 0.01% RA...
USR2G-25KX1	Riedon	12.39 $	38	RES 25K OHM 0.6W 0.01% RA...
USR2G-2KX1	Riedon	11.59 $	43	RES 2K OHM 0.6W 0.01% RAD...
USR2G-500RX1	Riedon	11.59 $	60	RES 500 OHM 0.6W 0.01% RA...
USR2G-2K5X1	Riedon	11.59 $	1000	RES 2.5K OHM 0.6W 0.01% R...
USR2G-10KX1	Riedon	11.59 $	51	RES 10K OHM 0.6W 0.01% RA...
USR2G-20KX1	Riedon	12.39 $	18	RES 20K OHM 0.6W 0.01% RA...
USR2G-350RX1	Riedon	11.59 $	1000	RES 350 OHM 0.6W 0.01% RA...
USR2G-15KX1	Riedon	12.39 $	62	RES 15K OHM 0.6W 0.01% RA...
USR2G-120RX1	Riedon	11.59 $	27	RES 120 OHM 0.6W 0.01% RA...
USR2G-100RX2	Riedon	11.59 $	84	RES 100 OHM 0.6W 0.01% RA...