UTP6A10MGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UTP6A10MGR is a machine designed for medium voltage ring main circuits. It is a combination of high voltage ring main unit (RMU) and low voltage ring main units (LVRMs). The UTP6A10MGR has an insulation level of 10 kV, and is designed to mount inside a ring main mains. It is suitable for use in medium voltage distribution networks, such as underground, overhead and overhead.

The UTP6A10MGR is designed to be used in a low voltage ring main unit. Its main applications include metering, protection, switching, load measurement, fault location, and power supply coordination. It is also used for the control and coordination of feeder circuits in systems with high reliability requirements. The UTP6A10MGR is designed to be used in both indoor and outdoor environments.

The UTP6A10MGR includes two types of electric circuit breakers: one for switching and one for metering. The electric circuit breakers are enclosed in an insulating plastic housing and it is possible to install both types of breakers in a single unit. The UTP6A10MGR also includes a universal control panel. This allows operators to configure the system according to their requirements. On the control panel, it is possible to view the status of the units, adjust the settings, activate the overload protection, and initiate a switch test.

The working principle of the UTP6A10MGR is quite simple. When the electric circuit is closed, the current is allowed to flow from the incoming line to the consumer’s load. To ensure that the load is protected from overvoltages, the UTP6A10MGR uses transformer taps. The primary and secondary windings of the transformer are connected to the electric circuit. When power is supplied to the primary winding of the transformer, the secondary winding will amplify the voltage and provide overvoltage protection.

The UTP6A10MGR includes a motorized switch that opens and closes the electric circuit. This switch is controlled by a control unit and operates in three modes: on, off and auto. In the auto mode, the switch will automatically open the circuit when the load reaches its preset limit. In addition to the aforementioned features, the UTP6A10MGR includes an auto-protection system that limits the amount of current flowing through the system.

The UTP6A10MGR is designed to operate in harsh environmental conditions and can withstand temperatures up to 140 degrees Celsius. It is corrosion-resistant and is suitable for use in offshore installations. It has been extensively tested and certified to European standards and is suitable for use in systems up to 33 kV.

In conclusion, the UTP6A10MGR is a reliable and durable piece of equipment. Its primary applications include protection, switching, metering, load measurement, fault location, and power supply coordination. It is designed to provide a safe and cost-effective solution for medium voltage distribution networks.

The specific data is subject to PDF, and the above content is for reference