UTPCH115Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UTPCH115Y is a high-performance, low-power, all-in-one constant temperature and humidity controller. It can accurately control the temperature and humidity inside an enclosure. It is widely used in semiconductor wafer production, food and beverage storage, airport tarmac, agricultural research laboratories, meteorological stations, scientific experiments, and other places where precise temperature and humidity control is required.

The main components of UTPCH115Y are a controller, temperature sensors, humidity sensors, a fan, panel indicators, and a display. The controller is designed with a microcomputer control unit and is responsible for receiving signals from the temperature and humidity sensors, processing the signals, and sending the appropriate commands to the appropriate load devices. The temperature sensors measure the temperature inside the enclosure. The humidity sensors measure the relative humidity inside the enclosure. The fan is used to move the air within the enclosure for better temperature and humidity regulation. The panel indicators indicate the status of the controller, for example if the set temperature or humidity have been reached. The display is used to show the current temperature and humidity settings and the current temperature and humidity inside the enclosure.

The working principle of UTPCH115Y is quite simple. When the temperature or humidity in the enclosure surpasses the set value, the sensors send a corresponding signal to the controller, which then sends the appropriate commands to the load device. For example, when the temperature in the enclosure is higher than the set value, the controller will send a signal to the fan to start working and the panel indicator will light up to indicate that it is in operation. After the set temperature is reached, the fan will stop running and the panel indicator will return to its original state.

When the enclosure temperature and humidity both reach the set values, the controller signals will be sent to the load devices to maintain the equilibrium, thus keeping the temperature and humidity at the desired levels. If the enclosure temperature or humidity exceeds the set values, the controller will send signals to the fan to start running, thus cooling or humidifying the air in the enclosure. When the set temperature and humidity are reached, the fan stops running and the controller will maintain the equilibrium.

UTPCH115Y is a perfect solution for controlling the temperature and humidity inside an enclosure. Not only is it easy to install and maintain, but it also provides accurate and reliable temperature and humidity control. With its flexibility, the system can easily be adjusted to fit the requirements of any specific application.

The specific data is subject to PDF, and the above content is for reference