V07E250

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Varistors, MOVs are among the most common solutions to protect electronic circuits from damage by transient overvoltages. V07E250, with its epoxy resin housing, is a very successful device. This article will discuss its application field and working principle, and explain how it works.

The V07E250 is a metal oxide varistor (MOV) designed for use in a wide range of applications, such as power supplies, communication systems, automotive electronics, etc. It is intended to provide a level of protection against surges from as little as 200 Volts, up to a maximum voltage of 780 Volts. In general terms, the V07E250\'s peak pulse current is rated at 20,000A.

The key feature of the V07E250 is its ability to respond quickly to voltage spikes. When an overvoltage occurs, the MOV acts like a short circuit, allowing the current to flow through it to ground, thus limiting the surge energy to the connected devices. The MOV then returns to its normal open circuit state after the overvoltage has been dissipated.

The working principle of the V07E250 lies in its ability to react to an incoming overvoltage. The device contains a ceramic element consisting of zinc oxide grains that are bonded together and surrounded by a semiconducting binder material. When a voltage spike occurs, the zinc oxide grains become electrically conductive and allow electricity to flow through it to ground, thus providing a path for the current flow and limiting the voltage. This is done in a few microseconds, thus providing an effective response to the transient overvoltage.

The V07E250 is designed to provide a high level of protection for both AC and DC circuits. For AC circuits, the MOV acts like a surge absorber. It absorbs the surge energy and dissipates it as heat inside the device. The MOV then returns to its open circuit state after the surge energy has been dissipated. For DC circuits, the MOV behaves like a bypass diode. It provides a short-circuit path for the current flow and periodically reverts back to its open circuit state to protect the connected device.

The V07E250 is an effective, reliable and cost-effective solution for a variety of applications. It provides a high level of protection against transient overvoltages, and is suitable for a wide range of applications, from power supplies to communication systems, automotive electronics and more.

In conclusion, the V07E250 is a powerful and reliable MOV designed to provide protection against transient overvoltages. Its epoxy resin housing ensures reliable and consistent operation, and its peak pulse current of 20,000A provides excellent protection. Its zinc oxide grains become conductive when an overvoltage occurs, allowing the current to flow through it and limit the voltage, thus protecting the connected devices. Its ability to work with both AC and DC circuits make it a great choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference