V07E50P

TVS (Transient Voltage Suppressors) protect electronic equipment from damage caused by transient voltages, including overvoltage and high voltage pulse. Varistor disks, along with MOVs (Metal Oxide Varistors), are commonly used in this application. The V-07E50P is a popular Varistor for this type of protection. It is able to provide a very reliable protection in a range of different applications, such as telecommunications, medical, industrial and consumer products.

The V-07E50P Varistor is a dual-element discrete component, comprising two elements connected in series. It has a disc-shaped ceramic body with an outer diameter of 0.7 inches and a thickness of 0.5 inches. The component can handle voltages up to 500 volts, while its clamping voltage is typically between 10 and 100 volts. The maximum peak pulse leverage current can reach up to 5 kilo amperes, though the maximum steady state current should not exceed 75 amperes. The maximum capacitance rating is 440 picofarads.

The working principle of the V-07E50P is quite simple. When the voltage applied across the device exceeds the maximum clamping voltage, the metal oxide varistor (MOV) inside the device will reduce its impedance and let current pass through it. This is called the “avalanche breakdown” effect, which results in the clamping of the voltage. As a result, the voltage across the MOV will be substantially lower than the original voltage applied, reducing the potential for damage to the electronic device.

The V-07E50P Varistor is primarily used in applications where it is necessary to protect the equipment from high voltage transients that can potentially damage the equipment or cause loss of data. It can also be used in high temperature environments, as it is able to withstand operating temperatures of up to 125°C. In addition, the device is very reliable and has a long service life, making it an ideal choice for protection in a variety of applications.

The V-07E50P Varistor is a commonly used device among electronics enthusiasts and professionals due to its wide range of applications and reliability. Its ability to clamp voltages up to 500 volts makes it suitable for a range of applications where high voltage may be present, while its maximum peak pulse leverage current of 5 kilo amperes ensures that it is able to handle even the most severe transient voltages. As such, the V-07E50P Varistor is an excellent choice for providing reliable protection against transient voltages.