V07E300PL2A Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS or transient voltage suppressive products are designed to protect systems from large power surges or ESD (electrostatic discharges) that can damage electronic equipment and components. Transient voltage suppressors, also known as MOVs (metal oxide varistors) or varistors, are designed to absorb or divert transient energy. One of the most popular TVS devices is the V07E300PL2A, also known as the 600W surge stopper diode or just the surge stopper. This device is used to protect equipment from high-energy voltage surges, such as those caused by lightning strikes or contact with power lines.

The V07E300PL2A has particular application in automotive, telecommunications, and consumer electronics industries due to its 60V peak impulse voltage, or PIV, and 6.5V clamping/holding voltage. It can absorb up to 600 watts of power and is one of the most efficient power surge protection devices available. The V07E300PL2A is particularly useful in automotive applications where large voltage spikes can result from arcing contacts, erroneous wiring, and poor grounding, as well as internal components. It is also useful for telecommunication equipment, to protect against ESD.

The V07E300PL2A is a bidirectional diode, and its unidirectional characterization is symmetrical.It works by clamping the voltage when a transient surge is detected. A varistor or MOV works according to the same principle, however, the V07E300PL2A is much more efficient and can absorb more power. This is accomplished by a sudden increase in current across the device to clamp the transient voltage, thereby protecting the equipment or component from damage.

When operating correctly, the V07E300PL2A should not be damaged by any transient voltage rise. If the voltage rises too high and a second breakdown occurs, any additional current beyond what the device can absorb will be increased significantly as the device conducts. This will cause permanent damage to the device and the device will need to be replaced. Therefore, proper installation of the V07E300PL2A is important, as an incorrect installation could result in device failure and potentially cause permanent damage to the equipment or components being protected.

The V07E300PL2A is typically installed across the power input of the protected circuit, or line to ground on the protected circuit. This will ensure that current flowing into the circuit is kept to a safe level, and any potential voltage surges that may occur will be diverted to ground. Proper installation will also ensure that the V07E300PL2A is kept at a safe temperature, as it is designed to operate between -40 and +85°C.

The V07E300PL2A is designed for high efficiency and has the capability to reduce and suppress energy from large voltage surges, providing excellent lightning and ESD protection for a variety of electronic components and systems. It is a low-cost, reliable, and easy-to-install surge stopper device that can protect equipment from unnecessarily high voltage levels.

The specific data is subject to PDF, and the above content is for reference