V100ZC4P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Varistors, commonly known as Voltage Dependent Resistors (VDRs), are non-linear, passive electronic components with symmetrical voltage/current responses and variable resistance. MOVs, or Metal Oxide Varistors, are a type of varistor. They are made up of a ceramic material, such as zinc oxide, sandwiched between two metal plates that act as electrodes. MOVs are used to protect circuits from high voltage transients, otherwise known as “spikes”. A Voltage Multiplier (V100ZC4P) is an application of MOVs that takes advantage of their voltage and current responses to generate higher voltages, thereby providing surge protection.

The V100ZC4P device is a specialized component composed of six individual MOVs in a single package. Each MOV contains a pair of plates that are separated by a ceramic disc which acts as the dielectric layer, and thus the resistance. This arrangement enables the V100ZC4P to be very compact in size while also providing a very high voltage and current rating. It is typically used to protect electronic circuits from transient voltages, which are spikes in the voltage caused by electrical or environmental conditions.

The V100ZC4P works by using the non-linear voltage/current characteristics of the MOVs. When a voltage transient occurs, the MOVs are exposed to a higher voltage than they are rated for and their resistance increases. This increases the total resistance of the device, which in turn limits the amount of current that the transient can draw from the protected circuit. This serves to protect sensitive electronic components from damage by quickly diverting the current away from them.

The V100ZC4P is generally used in electronic equipment such as computers, televisions, and other consumer electronics. The device is typically installed on the AC power input line of the equipment to provide surge protection. This helps to ensure that even if a voltage transient occurs, the equipment will continue to operate as normal without damage.

The V100ZC4P is also used to protect other sensitive electronic components such as diodes and transistors. When the component is exposed to a transient voltage, the MOVs in the device limit the amount of current that can flow through them, thereby protecting the component from damage. This makes the V100ZC4P a must-have device for circuit designs that involve high voltage transients.

The V100ZC4P is an important component for protecting sensitive electronic circuits from high voltage transients. Equipment such as computers, televisions, and other consumer electronics can be safeguarded from damage by using this device. Its compact size makes it easy to install in any type of circuit board, and its non-linear voltage/current characteristics allow it to limit the amount of current that the circuit can draw in the event of a transient.

The specific data is subject to PDF, and the above content is for reference