V110A36M400BL

Current - Output (Max):	11.11A
Base Part Number:	V110A36M400
Size / Dimension:	4.60" L x 2.20" W x 0.62" H (116.8mm x 55.9mm x 15.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88.8%
Operating Temperature:	-55°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	400W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	36V
Voltage - Input (Max):	154V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters DC to DC converters are electrical circuits designed to convert a direct current (DC) signal from one voltage level to another. The V110A36M400BL especially, is a high reliability, low-cost DC converter for applications that require medium-power conversions between 10V to 36V and 400W maximum power. It offers space-saving design, high efficiency up to 96%, high voltage isolation, low noise levels and efficient thermal management.Applications of the V110A36M400BL include DC power distribution systems, telecom infrastructure, computing equipment, military/avionics, medical electronics, alternative energy storage technologies, motor control and robotics, and process control. Low power levels are suitable for LED lighting systems, electronic ballasts for HID (high-intensity discharge) lighting systems and many other consumer electronic products. This model also has an onboard memory for storing parameters so as to simplify the process of configuring the transformer.The V110A36M400BL works by using electric power as input from one DC source to create output power of different characteristics. It is usually a two-stage device using an inductor or transformer for transferring energy between its input and output. The first stage consists of a thyristor control circuit, which is used to regulate the power to the inductor. This serves to convert the input voltage to the desired output voltage. The second stage consists of a full wave rectifier bridge with synchronous rectification, which is used to deliver the desired output voltage.The process starts with a DC voltage input, and the control circuit charges the inductor with the required current in order to convert the output voltage to the desired level. The inductor then stores energy for the duration of the on time of the thyristor control circuit. During the off time, the energy stored in the inductor is released as output and the current to the load increases until it reaches its maximum value. The resulting output waveform is then rectified by the synchronous rectified bridge in order to provide a continuous DC output.The V110A36M400BL has an input voltage range of 9 to 18V, with a standard input voltage of 12V. The output voltage is adjustable from 0.85 to 3.3V, with a standard output voltage of 2.5V. The current rating is 400W max, with an efficiency rating of up to 96.6%. The working temperature ranges from -40°C to +100°C, making it suitable for a wide range of applications. Other features include low-ripple noise, soft-start mode, thermal protection and short-circuit protection.To conclude, the V110A36M400BL is a high efficiency, high reliability DC to DC converter specifically designed for medium-power applications in the 10V to 36V and 400W maximum power range. It is suitable for various applications such as power distribution systems, telecom infrastructure, LED lighting systems and robotics. Its low cost and high efficiency make it a cost-effective and reliable solution.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description