V110B15T200B3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters allow for the conversion of a DC voltage from one level to another. This is either from lower to higher levels or from higher to lower levels. The V110B15T200B3 is a DC-DC converter that has an application field from industrial to automotive.

The V110B15T200B3 DC-DC converter is a buck type switchmode power supply driver. It is designed to produce a stepped down DC voltage with adjustable output and is typically used in special areas of industries such as telecommunications, factory automation, transportation, and on-board vehicle power systems.

The V110B15T200B3 has a wide input voltage range of between 5Vdc and 28Vdc with output voltage adjustable between 0V and 20Vdc. It has the ability to convert a higher input voltage to a lower one and vice versa. It has a maximum output power of 200W, and a maximum sustainable current of 15A. The V110B15T200B3 also has a high efficiency of up to 94%.

The V110B15T200B3 works on the principle known as continuous conduction mode (CCM). In this mode, current is continuously supplied to the load over the whole cycle of operation independent of the load current. This reduces losses and increases efficiency. The V110B15T200B3 utilizes primary and secondary side synchronous rectification, i.e. the power device at the input and output side of the converter is controlled by the same PWM signal. This reduces switching losses and internal power dissipation, which contributes to its high efficiency.

The V110B15T200B3 comes with a number of features which make it a suitable option for many applications. These include an enable pin, voltage sense pin, and status LED. This allows for the device to be switched off and on and also has a feature to indicate the status of operation. It also has a protection feature against overtemperature as well as overvoltage and short circuit. Another feature is the built-in soft-start which helps in limiting the inrush current. It accomplishes this by gradually ramping up the output voltage for a few milliseconds after power-on.

The V110B15T200B3 is an integrated device that requires additional components to implement a buck-type switchmode power supply driver. These components include an input capacitor, an output capacitor, a rectifier bridge and the actual output inductor. It also requires an external controller to provide a suitable PWM signal, a feedback circuit to provide the accurate output voltage as set, a protection circuit, and an EMI filter circuit in order to ensure that emission standards are met.

The V110B15T200B3 is a suitable choice for a wide range of industries due to its wide input voltage range and the range of features that it comes with. It\'s continuous conduction mode also ensures high efficiency and good power conversion. The additional components that are required for implementation can be relatively expensive but the improved performance of the V110B15T200B3 makes the device a viable choice in many situations.

The specific data is subject to PDF, and the above content is for reference