V110B5M100B

Current - Output (Max):	20A
Base Part Number:	V110B5M100
Size / Dimension:	2.28" L x 2.20" W x 0.50" H (57.9mm x 55.9mm x 12.7mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	81.3%
Operating Temperature:	-55°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	MINI
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	154V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters: V110B5M100B Application Field and Working Principle

DC-DC converters are devices used to convert direct current electrical power from one voltage level to another. As direct current is the most commonly used form of electrical power, DC-DC converters can be found in a wide variety of applications, ranging from automotive and aerospace to consumer and home electronics. One example of a DC-DC converter is the V110B5M100B, which is a regulated switching converter that is primarily used in industrial, automotive, and consumer applications. This article will discuss the application field and working principle of the V110B5M100B.

Application Field

The V110B5M100B is designed to accept 5V DC input and output 10V DC or vice versa. The nominal input voltage range is 4V to 7V and the output voltage range is 9V to 11V, with an efficiency of 80-90% typical. The V110B5M100B is particularly well-suited for applications in which 5V or 10V inputs and outputs are required. Some common applications include:

• Automotive systems
• Industrial controllers and PCs
• Consumer electronics such as cell phones and digital cameras
• Aerospace and defense applications
• Powering small embedded systems

Working Principle

The V110B5M100B uses a step-down approach, a form of switched-mode power conversion. After the input voltage is rectified, it is capacitively filtered and then passed through a buck switching step-down converter. The buck converter is essentially an inductive-capacitive network that is driven by a reference signal (typically a sawtooth or pulse-width modulation waveform). This reference signal controls the duty cycle of a switch device (typically a MOSFET), which then provides the output voltage. The output voltage is then passed through a low-pass LC filter, which reduces the high-frequency ripple components of the output voltage.To ensure that the output voltage remains regulated over the input voltage range, the V110B5M100B also includes several integrated protections. These include under-voltage protection, output over-voltage protection, and output short-circuit protection. The V110B5M100B also includes a thermal protection system to ensure that the converter does not overheat.

Conclusion

The V110B5M100B is a regulated switching converter that is suitable for many industrial, automotive, and consumer applications. The device is designed to accept 5V DC input and output 10V DC or vice versa, and has a nominal input voltage range of 4V to 7V and an output voltage range of 9V to 11V. The V110B5M100B utilizes a step-down approach, a form of switched-mode power conversion that relies on a reference signal and a switch device. The output voltage is then filtered to reduce high-frequency ripple components, and integrated protections are used to ensure that the output voltage remains regulated and the device does not overheat.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description