V110C12E100BS2

Current - Output (Max):	8.33A
Base Part Number:	V110C12E100
Size / Dimension:	2.28" L x 1.45" W x 0.54" H (57.9mm x 36.8mm x 13.7mm)
Package / Case:	Quarter Brick
Mounting Type:	Through Hole
Efficiency:	87.2%
Operating Temperature:	-10°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	MICRO
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	12V
Voltage - Input (Max):	154V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

A DC DC converter is a power conversion device that can be used to convert a direct current input voltage to a direct current output voltage. It is also capable of converting power from one voltage level to another. DC DC converters are used extensively in many industries such as automotive, aviation, consumer electronics, medical, military and industrial applications.

The main purpose of a DC DC converter is to step up or step down the input voltage to a level suitable for the load. This is normally done by adjusting the frequency or duty cycle of an electronic switch. The switch is controlled by a microcontroller or other electronic control circuit and the voltage level is adjusted by a feedback loop.

The V110C12E100BS2 is an example of a DC DC converter. It is designed for use in conventional 12V lead acid battery systems. It is capable of delivering up to 100 Amps of current with a maximum output voltage of 110V. The input voltage of the converter can range from 6V to 17V and is designed to be used with a regulated system. The converter can be used as a buck or boost converter depending on the application.

The working principle of a DC DC converter is the same regardless of the type or application. The input voltage is first converted to a higher or lower voltage level using the converter’s internal switching components. The output voltage is then adjusted by a feedback loop and diodes to prevent the output from exceeding the rated output voltage. The switch is then used to control the output voltage and the converter can be used as either a buck or boost converter depending on the application.

The V110C12E100BS2 is a highly efficient DC DC converter designed for use in automotive and industrial applications. It has a very high current capability and can handle heavy duty loads such as starters and motors. The converter is designed to operate under high temperature conditions and meets CE approval for safety. The converter is also designed with a low Electromagnetic Compatibility (EMC) level and is widely used in applications where EMC performance is critical.

In conclusion, the V110C12E100BS2 is an example of a DC DC converter that is designed for use in a variety of automotive and industrial applications. It is a highly efficient converter that is capable of delivering up to 100 Amps of current and has a maximum output voltage of 110V. The converter can be used as either a buck or boost type and is designed to withstand high temperature conditions. It is also designed with a low EMC level and meets the required CE approvals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description