V20E17AUTO

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

V20E17AUTO is a type of TVS (Transient Voltage Suppression) device, specifically a varistor—a voltage-dependent resistor. It is usually used to absorb electrical energy in the form of transient electric overshoots and surges which can be damaging to electrical equipment. MOVs (Metal Oxide Varistors) are similar devices with the same purpose, but are composed of a material with more conductive properties.

The V20E17AUTO is a bi-directional, non-polar electronic component which regulates the voltage of a system, protecting it from power transients and overvoltage scenarios. It works by providing a low-impedance path to ground and will allow the flow of currents in either direction. Typically, it is configured in circuits with an appropriate value of surge current—designed to allow it to absorb primary and secondary line transients safely.

In operation, the V20E17AUTO functions by creating a low-impedance connection to ground when exposed to an overvoltage—here defined as a voltage greater than the peak surge of the component. At this state, known as clamping, the voltage is limited to a safe threshold, usually within the specified range of the device\'s technical specifications. This is done by limiting the current that is able to flow through it.

It should be noted that the rated voltage and maximum current vary between devices, and depend on the specific application. These are typically found in the device\'s datasheet—it is important to make sure the V20E17AUTO is chosen to fit the specific application needs. Typical specifications can be anywhere from 5 volts to 600 volts, with a maximum continuous current of 9.75 A.

These devices are able to limit an overvoltage to a safe level without the need for circuit breakers or other protection devices. They are commonly found in various applications, from power strips and power supplies to automotive, aviation, and telecom industries. It is especially useful in applications such as industrial systems where direct current (DC) voltage protection is necessary.

The V20E17AUTO is a cost-effective and reliable solution for many applications. When used properly, it can provide an effective, stable form of surge protection, protecting connected equipment from destructive energy transients.

The specific data is subject to PDF, and the above content is for reference