V23054D1019F104

Turn On Voltage (Max):	10.5 VDC
Coil Resistance:	390 Ohms
Coil Power:	1.03 W
Contact Material:	Silver (Ag)
Operating Temperature:	-40°C ~ 70°C
Termination Style:	Plug In
Mounting Type:	Socketable
Features:	--
Release Time:	2ms
Operate Time:	16ms
Turn Off Voltage (Min):	--
Series:	V23054, AXICOM
Switching Voltage:	250VAC, 250VDC - Max
Contact Rating (Current):	5A
Contact Form:	DPDT (2 Form C)
Coil Voltage:	20VDC
Coil Current:	51.3mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps: V23054D1019F104 Application Field and Working Principle

Power relays are devices that allow circuits to be connected and disconnected in a controlled manner. They can be used in a variety of industrial, automotive, medical and commercial applications. The V23054D1019F104 is an electromechanical relay, designed to switch current in applications that require a higher current rating than 2 amps.The V23054D1019F104 has a rated current of 10 amps at a maximum voltage of 250 AC and 20 amps at a maximum voltage of 125 AC. The volt-ampere (VA) rating is 100, and the minimum insulation voltage is 690Vac. The maximum carry current is 10 amps at a maximum voltage of 250 AC, and 20 amps at a maximum voltage of 125 AC. The minimum operating voltage is 40 VDC.There are two types of contact resistance: one for NO (normally open) contacts and another for NC (normally closed) contacts. The maximum contact resistance for an NO contact is 100 milliohms and the maximum contact resistance for an NC contact is 30 milliohms. These figures are applicable when the load is under rated conditions.The V23054D1019F104 has a low profile design that allows for space savings. It is UL recognised and meets the requirements of UL 508. The relay comes with a 6-pin Quick Connect terminal block connector, allowing for easy wiring to the system. It is available in four colors: black, yellow, green and orange.The V23054D1019F104’s working principle is fairly simple. When an electric current is applied to the input coil, it creates a magnetic field which causes the contacts to close or open. When the current is removed, the contacts revert to their original state, either open or closed.The V23054D1019F104 can be used in a variety of applications including lighting, switches, fan controls, motor controls, HVAC systems, appliance controls and medical devices. The relay is commonly used in automotive applications such as starter motors, fuel pumps, and air conditioning systems. It can also be used in industrial automation systems, such as process controls and monitoring.In summary, the V23054D1019F104 is an electromechanical relay designed for switching higher current loads, with a rated current of 10 amps at 250 AC and 20 amps at 125 AC. It has a low profile design, meets UL 508 standards, and is available in four colors. The relay’s working principle is based on an applied current to the input coil that generates a magnetic field which in turn causes the contacts to open or close. The device can be found in many applications, including automotive and industrial automation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description