V24B5E200BS3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are used to convert electrical energy from one form to another. This is achieved by changing the voltage, current, or both. The V24B5E200BS3 DC-DC converter is a two-phase input converter, with an output voltage of 24VDC and a maximum output current of 5A. Its principle of operation is based on a buck-derived topology.

The V24B5E200BS3 is designed for use in applications such as industrial automation, power supplies, and sensing power systems. Its input range is from 6V to36V, and it is designed to provide low voltage, high accuracy, and high efficiency. The output is adjustable and has a compatible transient response.

The V24B5E200BS3 consists of an input voltage module, a switching regulator, and an inductor and capacitors. The input voltage module measures the input voltage and converts it into a voltage which can be used by the switching regulator. The switching regulator then takes this voltage and converts it into a series of pulses. The inductor and the capacitors change the frequency and voltage of these pulses and convert them to the DC output.

The V24B5E200BS3 has been designed to meet EMC, EMI, and UL standards. It is also protected against overcurrent, undervoltage, and reverse polarity. The maximum junction temperature is 125°C, with an operating temperature range of -40°C to +85°C. The converter is rated for a minimum of 50,000 hours of operation at full load, and includes protections for overvoltage, short circuit, and overcurrent.

The V24B5E200BS3 is a highly efficient converter which is suited for industrial applications. It is reliable and robust, and is protected against a variety of issues. It is designed to meet all relevant safety standards, and to operate efficiently over a wide temperature range. In addition, it provides high accuracy output and long life operation.

The specific data is subject to PDF, and the above content is for reference