V250LA10P Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppressors (TVSs) are commonly used to protect sensitive electronic devices from high voltage transients. These high voltage transients can be caused by lightning, power surges, and load switching in power systems. TVSs are designed to absorb transient electrical energy, dissipate it in the form of heat, and clamp down the voltage level to a safe level. TVSs are available in different packages including varistors, polymeric Positive Temperature Coefficient (PTC) devices, and Metal Oxide Varistors (MOVs).

The V250LA10P is an MOV device designed for use in the protection of data lines and low voltage power systems. MOVs contain a metal oxide layer, such as zinc oxide, which changes resistance with the applied voltage. This change in resistance is due to the zinc oxide layer expanding or contracting with each high voltage transient. When the voltage level exceeds a set voltage, the metal oxide layer will change its resistance and dissipate the excess energy.

The main application of the V250LA10P is in the protection of data lines, such as parallel and series bus arcs, from overvoltage transients and static discharges. It is also suitable for the protection of low voltage power supplies against lightning transients and supply faults. The device can also be used in the protection of cabling, DC/DC converters, and transport networks.

The V250LA10P can operate in voltages up to 250 volts and is rated for peak pulse power of 500 watts. It can handle pulse currents of up to 2.5 kiloamps. Once the device has reached the end of its life, it will indicate this by decreasing its clamping voltage. This makes the device suitable for use in applications where it is necessary to monitor device performance.

The working principle of the V250LA10P MOV is similar to other zinc oxide based MOVs. When a high voltage transient is applied, the zinc oxide layer will expand or contract and change resistance. This resistance change causes a voltage drop across the device which clamps the voltage down. The current then flows through the device and is dissipated as heat.

The V250LA10P device has been designed for use in low voltage applications, such as data lines and power supplies. It can handle pulse currents of up to 2.5 kiloamps and has a peak pulse power rating of 500 watts. Once the device has reached the end of its life, it will indicate this by decreasing its clamping voltage, allowing users to monitor device performance.

The specific data is subject to PDF, and the above content is for reference