V250LC40CPX10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Varistors, MOVs are protective devices designed to protect electronic equipment from damaging electrical transients. The V250LC40CPX10 is a Varistor that is designed for use in various applications in order to protect against overvoltages and overpowers.

In general, a Varistor (or voltage dependent resistor - VDR) is a non-linear device that provides a low-impedance path to ground when presented with an overvoltage across its terminals. This low-impedance path helps to reduce the transients and protects downstream equipment from being damaged. The V250LC40CPX10 Varistor is designed specifically for filter protection and is suitable for use in many AC power line and transient related applications.

The V250LC40CPX10 Varistor has a maximum breakdown voltage of 250 Volts (DC or AC-peak). It also has a maximum current rating of 5 Amps at around 125 Celsius. The device is compact, with a typical diameter of 8mm, and it has a solid and reliable construction. The V250LC40CPX10 also has good noise performance and its symmetrical response helps reduce electromagnetic interference from interfering with other electronics. Furthermore, the Varistor has superior energy absorption which helps in providing better protection from electrical transients.

In addition to its protection applications, the V250LC40CPX10 can be used in filtering applications, such as suppressing high frequency noise. In this application, theVaristor acts as an attenuator and filters out high frequency spikes thus reducing the amount of EMI that is present in the system. This helps reduce the adverse effects of noise on other electronics. The device can be used in both circuit design for EMI noise suppression and in printed circuit board design.

The working principle behind the V250LC40CPX10 is relatively straightforward and has to do with the current-voltage (I-V) relationship found in various non-linear components. When the voltage across the Varistor exceeds its breakdown voltage (VBR), a sudden decrease in resistance occurs, thus providing the low-impedance path to ground. The VBR for the Varistor can be approximated to be in the range of 125-320V DC or 250-600V AC peak.

In summary, the V250LC40CPX10 is a Varistor that is specifically designed for use in filter protection and EMI noise suppression applications. It has a maximum breakdown voltage of 250 Volts (DC or AC-peak) and has a maximum current rating of 5 Amps at around 125 Celsius. The device has good symmetrical response, superior energy absorption and a low profile which makes it suitable for many applications. The working principle behind the V250LC40CPX10 is based upon the current-voltage relationship found in non-linear components, which enables the device to provide a low-impedance path to ground when presented with an overvoltage across its terminals.

The specific data is subject to PDF, and the above content is for reference