V250LT2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) devices are designed to protect electronic circuits from damaging over-voltage transients such as ESD (electrostatic discharge), electric induction, lightning strikes, or short-term power-supply surges. These types of electronic components are used in a wide range of applications, from consumer electronics to industrial control systems. One such device is the V250LT2, which is a surface-mount varistor commonly used in the higher-power applications.

The V250LT2 is a bi-directional device that provides fast response to transients, with a threshold of 10V – 280V, a maximum energy absorption of 350J, and a voltage clamp of 370V. It is designed to be supplied in a variety of locations to provide greater coverage in case of power surges or lightning strikes, and is packaged in a 0805 footprint for better portability in most applications. The V250LT2 is also UL 497A listed for industrial applications, meaning that it has been tested and certified to meet the stringent safety standards set by Underwriters Laboratories.

The working principle behind the V250LT2 is based on the varistor principle. A varistor is a device that changes its resistance in response to an applied voltage, allowing it to limit a voltage transient by providing very high surge current capability. In the V250LT2, this is accomplished by using a zener diode with a low breakdown voltage combined with a metal oxide varistor (MOV).

When an over-voltage transient is sensed, the zener diode will start conducting, thus diverting the surge current away from the device and into the MOV. The MOV will then act as a resistor, dissipating the energy from the current and providing a clamping voltage that limits the peak voltage to a safe level. The MOV is designed to limit any further voltage transients while still allowing a safe operating voltage, thus providing a measure of protection against damage to the protected circuit.

The V250LT2 is used in a variety of applications, from consumer appliances to industrial control systems, and is particularly suitable for higher-power applications due to its high peak current capability and wide operating temperature range. It is also used extensively in automotive electronics, where it can provide protection for various systems such as power steering and airbag systems.

In summary, the V250LT2 is a surface-mount varistor that provides fast response to transients and is capable of withstanding higher surge current levels. It works on the principle of a zener diode combined with a MOV, which provides a clamping voltage to protect the protected circuit from damage. The V250LT2 is suitable for a variety of applications, from consumer appliances to industrial control systems, and is particularly suited for higher-power applications due to its high peak current and wide operating temperature range.

The specific data is subject to PDF, and the above content is for reference