V270RA16X2749

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

V270RA16X2749 is a Varistor which is designed for a wide range of transient voltage surge suppression applications. It is a multi-layered monolithic silicon semiconductor device that acts to protect sensitive electronic components from voltage transients caused by Electrostatic Discharge (ESD), Lightning, and other sources of fast transient overvoltage. This varistor is composed of several zinc oxide wires embedded in a moisture-proof epoxy coating layer. The wires are encapsulated in ceramic-filled polypropylene film and linked to a printed circuit board.

The application field and working principle of V270RA16X2749 are very useful for overvoltage protection, surge protection, power line protection and Electronic Equipment Protection. Varistors are very useful for providing protection from massive current surges due to lightning, ESD and other factors. In order to protect the connected components from the overvoltages, a varistor expands its characteristic so that the connected components can be prevented from any damage or malfunction. A varistor\'s high junction capacitance is essential in order to be able to clamp the transients as quick as possible. Whereas typical varistor values or Non-Linear Coefficient are usually between 1 to 10 percent of the simple transistors, a varistor’s value is typically around 50 to 100 percent. This makes them the best choice for transient voltage protection.

V270RA16X2749 utilize the Metal Oxide Varistor (MOV) technology in order to provide maximum protection from overvoltage. The MOVs are the most widely used type of varistors because of their high levels of hysteresis, reliability, and temperature stability. MOVs are typically composed of two metal oxide layers deposited on either side of a zigzag oxide layer. When an overvoltage is applied, the oxide layers generate a clamping action that limits the overvoltage and ensures that only low voltages are applied to the connected equipment. As the voltage is increased, the varistor increases its resistance gradually. This limits the peak overvoltage and ensures safe operation of the equipment.

The V270RA16X2749 also have a unique design that provides more layers of protection. The varistor is composed of two metal oxide layers that are connected through a central zigzag oxide layer. This design allows the varistor to act like a fuse and limit the current to safe operating levels when exposed to an overvoltage. Additionally, this design also increases the varistor’s capacity to absorb high levels of current during a short circuit. This ensures safe operation of the connected equipment when connected to an overloaded motor. Finally, the varistor’s terminal can be easily connected to the control board, which makes installation easy.

In addition to its shockproof properties, V270RA16X2749 also provides excellent corrosion resistance. This is due to the varistor’s coating which is resistant to corrosion and oxidation. As a result, the varistor can be used in corrosive and wet environments without any negative effects on the performance of the device. The varistor is also designed to dissipate heat quickly, which keeps the temperature of the varistor low and ensures long-term reliability and performance.

Overall, V270RA16X2749 are designed to protect sensitive electronic components from overvoltage. It utilizes the Metal Oxide Varistor (MOV) technology in order to maximize protection from overvoltages. Additionally, the varistor provides excellent corrosion resistance and is designed to dissipate heat quickly. This ensures that the varistor can be used in corrosive and wet environments with no negative effects on its performance. As a result, the V270RA16X2749 are the perfect choice for a wide range of overvoltage applications.

The specific data is subject to PDF, and the above content is for reference