V421CA40

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A varistor, or Voltage Dependent Resistor (VDR), is a device that is used to protect sensitive electronics from high voltage transients, such as spikes and surges. The V421CA40 is a device that can be used to protect a circuit from transients caused by a variety of sources, such as power lines, lightning, and electrostatic discharges.

The V421CA40 is a metal oxide varistor (MOV). It is a non-linear, two-terminal electrical device consisting of a disk- or disk-like metal oxide layer that is expanded around an internal junction point. Depending on the application, the MOV can be configured as either a single or dual varistor. The V421CA40 is packaged in a radial-leaded form, and is designed to be used in a wide variety of circuits.

The main purpose of a varistor is to provide protection for sensitive electronics and components in a circuit. When exposed to a voltage spike or surge, the varistor will limit the amount of current that is allowed to pass through the device. This prevents the circuit from being damaged or destroyed by the transient. Additionally, the MOV will block any damaging transients from passing to other parts of the circuit.

The V421CA40 has a voltage rating of 32 VAC, and a maximum operating voltage of 25 VAC. It also has a maximum continuous current rating of 11 A and a maximum peak surge current rating of 560 A, both of which are rated at 1/10 of a second. The peak surge current rating ensures that the varistor will be able to handle the higher levels of current that can accompany a surge or spike.

The V421CA40 has a capacitance of 5.5 pF, which is quite low compared to other MOVs. This helps to ensure that the device will not degrade the signal in the circuit or create any undesired behavior.

The metal oxide layer of the V421CA40 is made up of zinc oxide, which provides an excellent protection for the device. The layer provides excellent resistance to high voltages and has a high breakdown voltage. Additionally, the layer is able to absorb large amounts of energy without sustaining any damage, making it an ideal choice for protecting against surges and spikes.

The V421CA40 is calibrated to provide the optimal protection for the circuit. The calibration is usually done through the manufacturer\'s software, and the varistor must be tested to ensure that the voltage and current ratings are correct before being installed in the circuit.

The V421CA40 is designed to be used in a variety of applications, such as power supply units, industrial machines, LED drivers, and communication equipment. It can also be used to protect circuits in products such as appliances, computers, and consumer electronics.

The V421CA40 is a reliable, cost-effective, and easy-to-use MOV. It provides excellent protection for circuits and is designed to handle high levels of voltage and current with minimal degradation. Its wide range of applications makes it an ideal choice for protecting circuits and components in a variety of applications.

The specific data is subject to PDF, and the above content is for reference