V47MT2A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Varistors, MOVs, are essential components in power electronics for different applications. They are used to provide protection against surge transients, high-voltage spikes and electrical noises. The V47MT2A is one of the most popular type, belonging to the category of Metal Oxide Varistors (MOVs). It provides excellent protection against over-voltage, over-current, high frequency switching, power line surges and noise coming from signal lines.

Basically, a varistor is a voltage-dependent resistor. It has a large resistance at low voltages and a very low resistance at high voltages. This allows it to reduce high voltage spikes, regulate voltage and provide protection against overvoltage, surge and noise. The V47MT2A is rated for 47mm diameter discs and has a 20A maximum current rating. It is also available with a flameproof rating of 8mm which meets UL94 V-0 standards.

The V47MT2A is a voltage dependent resistor that uses a metal-oxide film which acts as the resistive element. The film is designed to have a nonlinear voltage-resistance properties. The nonlinearity of the device gives it its surge protection qualities. As the applied voltage increases, the device clamps the voltage and has a limited increase in current.

When the voltage reaches its nominal voltage, the current flow decreases. This is due to the limited conductivity of the MOVs and thus helps to protect the circuits from short-term overvoltage spikes. The V47MT2A also provides a good clamping action which helps to reduce transient overvoltage and surge current. This makes it ideal for use in power electronics.

The V47MT2A is used in a wide range of applications, from power line surge protection for high voltage power lines to transient voltage suppression for audio and video signals. It is also used for electromagnetic interference (EMI) and radio frequency interference (RFI) protection as well as industrial applications such as welding and high-temperature environments.

The working principle of the V47MT2A is simple. When an overvoltage transient is detected, the MOV will act as a shunt and direct the excess current away from the load. This prevents the sensitive components from being exposed to dangerous levels of voltage.The clamping action of the V47MT2A also allows it to regulate the voltage and keep it at a safe level. This helps to protect the sensitive components from both overvoltage and undervoltage.

In conclusion, the V47MT2A is an ideal device for power electronics applications due to its excellent surge protection capabilities. It is a reliable, cost-effective and high performance device that can provide many benefits for a wide range of applications. From providing protection against overvoltage to helping regulate voltage levels, the V47MT2A is a must-have in any power supply design.

The specific data is subject to PDF, and the above content is for reference