V56CH8X3313

Series:	CH
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Maximum AC Volts:	35V
Maximum DC Volts:	45V
Varistor Voltage (Min):	50V
Varistor Voltage (Typ):	56V
Varistor Voltage (Max):	62V
Current - Surge:	100A
Energy:	1.4J
Number of Circuits:	1
Capacitance @ Frequency:	600pF @ 1MHz
Operating Temperature:	-55°C ~ 125°C (TA)
Mounting Type:	Surface Mount, MLCV
Package / Case:	2-SMD, No Lead

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The V56CH8X3313 is an example of an electronic component known as a TVS - Varistor, MOV (transient voltage suppressor). It is designed to protect sensitive electronic circuits from the electrical surges caused by lightning, electro-static discharge (ESD) or inductive switching. This device is a multi-layer ceramic (MLC) disc varistor which is designed for use in high voltage applications where high current surges can be expected.

Application Field

The V56CH8X3313 is designed to be used in high voltage applications such as utilities, railway signaling, data communication, medical electronics, automotive electronics and railway traction design. The device is able to protect the circuits from transient (short duration, high current) over-voltage events such as surge currents caused by switching inductive loads or lightning.The V56CH8X3313 can be used to protect the input of circuits from overvoltage such as the power supply and signal stages from an AC mains supplier. It can be used to protect the circuits from line overvoltage events or to protect against intentional short circuits. In addition, the device can be used to protect against transient over- and undervoltage events when the supply voltage is rapidly changing from under or overvoltage values.

Working Principle

The V56CH8X3313 works by limiting the amount of voltage that passes through the device and clamping the voltage at a maximum forward voltage level. The device consists of two electrodes which are connected to the power supply and the load. When an overvoltage event occurs, the voltage at the two electrodes is sensed and the device will respond by reducing the voltage at the load side to a set limit.The device works by creating a resistance between the two electrodes. When an overvoltage event occurs, the resistance increases. This increase in resistance reduces the amount of current that passes through the two electrodes, thus limiting the amount of voltage that passes through the device.The device is not able to completely eliminate surges but does reduce them so that they will not cause damage to electronic components. The device will work most effectively when mounted close to the load or circuit that is being protected.

Conclusion

The V56CH8X3313 is an example of a transient voltage suppressor, or TVS. It is designed to protect sensitive electronic circuits from overvoltage events such as surges caused by lightning, electro-static discharge (ESD) or inductive switching. The device works by creating a resistance between the two electrodes which reduces the amount of voltage that passes through and limits the current. The device is designed for use in high voltage applications such as utilities, railway signaling, data communication, medical electronics, automotive electronics and railway traction design.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description