V680LU100BP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Varistors, MOVs, also known as lightning arresters, can protect a device from an unexpected surge of voltage and current through it. TVS-Varistors, MOVs are a type of voltage-dependent devices which use a semiconductor material as the main component. TVS-Varistors, MOVs are designed to protect sensitive components of electronic devices such as computers, appliances, motors, and other electronic equipment from power surges. They can also be used to limit the transient voltage for use in safety-critical applications.

V680LU100BP is an example of a TVS-Varistor, MOV. It is a non-directional device, meaning that it will protect in either polarity direction. It has a voltage rating of 680 volts (V) and a current rating of 100 amperes (A). The device is a surface-mount component which is encapsulated in a plastic case and has two metal leads. The TVS-Varistor, MOV is designed to provide protection against transient overvoltage, lightning surges, electrostatic discharge, and electromagnetic interference, all of which can damage sensitive electronics.

The V680LU100BP works in a similar way as other TVS-Varistors, MOVs by providing a low resistance path for any excess voltage that enters the device. It uses a Zener diode as the main component, which is connected in parallel with the diode bridge on the anode side. The diode bridge is electrostatically biased in such a way that any of the excess voltage on the anode side is directly passed on to the diode bridge. The diodes in the diode bridge then act as a voltage shifter and inversely controls the voltage passing through it.

The Zener diode is designed to have a Zener voltage of about 680 volts, which is its breakdown voltage. When the voltage applied to the anode side of the device rises above this Zener voltage, the diode becomes conductive and acts as a short circuit, allowing the excess voltage to be diverted away from the device. The Zener diode then acts as a clamp or shunt to the excess voltage in order to protect the downstream electronics from overvoltage.

The V680LU100BP has a wide range of applications. It can be used in switching power supplies, medical equipment, and automotive electronics. It is also used in telecommunication and surveillance systems. due to its very good self-recovery and ability to provide protection in a variety of conditions. It is commonly used in battery-powered applications where transient overvoltage protection is needed, as well as in solar and other renewable energy systems.

Overall, the V680LU100BP is an important component in many electronics applications where overvoltage protection is required. It is a simple and reliable device that is designed to protect sensitive electronics from electrical surges. It uses a Zener diode to provide a low resistance path for any excess voltage and is designed to quickly divert the power away from the device to protect it.

The device is easy to install and use and it is relatively inexpensive compared to other TVS-Varistors, MOVs. It is also a very reliable device, with its self-recovery properties ensuring that it will continue to provide reliable protection in the case of an overload or sudden overvoltage.

The specific data is subject to PDF, and the above content is for reference