V680LU100CPX10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A varistor is a special type of voltage dependent resistor characterized by a large non-linear resistance. Varistors are used for the purpose of noise suppression in power electronic circuits. The V680LU100CPX10 is a varistor designed to protect AC power line applications. It is a snap-in type varistor with an operating temperature range of –40°C ~ +105°C.

The V680LU100CPX10 is a twelve-sector 180 degree design varistor with a metal oxide film bulk layer. The non-linear resistance of the V680LU100CPX10 is designed for use in AC power lines. It is designed to protect against over voltage transients and short circuit events. The rated energy dissipation of the V680LU100CPX10 is 1.0 Joules.

The V680LU100CPX10 features a very low operating voltage with a maximum DC clamping of 380V. The V680LU100CPX10 has a small body size with excellent thermal properties. It is very fast responding with a response time of less than 1ns.

The working principle of the V680LU100CPX10 is based on the operation of the metal-oxide varistor (MOV). When a surge is present, the MOV acts like a current-limiting resistor, clamping the voltage to a safe level and dissipating the excess current. The metal-oxide varistor works by having a very high resistance when there is no voltage present, and very low resistance when voltage is present. As the voltage increases, the resistance across the MOV decreases in a non-linear manner.

The V680LU100CPX10 is designed for use in AC power line applications where transient overvoltages may be present. It can be used to protect circuits from overvoltage transients and protective circuits that use voltage dependent resistors. It is also suitable for use in circuit protection applications for motor and solenoid control circuits. The V680LU100CPX10 can also be used for protection of power supplies, DC/DC converters, and other power conversion circuits.

In summary, the V680LU100CPX10 is a snap-in type varistor designed for AC power line applications. It has a very low operating voltage and a maximum DC clamping of 380V. The V680LU100CPX10 is a twelve-sector metal oxide film bulk layer varistor with an operating temperature range of –40°C ~ +105°C. The working principle of the V680LU100CPX10 is based on the operation of the MOV, which is a very high resistance with no voltage present, and decreasing resistance as voltage increases. The V680LU100CPX10 is suitable for use in AC power line and circuit protection applications.

The specific data is subject to PDF, and the above content is for reference