Allicdata Part #: | VB-4141-ND |
Manufacturer Part#: |
VB-4141 |
Price: | $ 234.12 |
Product Category: | Switches |
Manufacturer: | Omron Automation and Safety |
Short Description: | SWITCH SNAP ACTION SPDT 10A 125V |
More Detail: | N/A |
DataSheet: | VB-4141 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 212.83900 |
Ingress Protection: | IP67 - Dust Tight, Waterproof |
Mechanical Life: | 5,000,000 Cycles |
Electrical Life: | 300,000 Cycles |
Operating Position: | 0.512" (13.0mm) |
Operating Temperature: | -10°C ~ 80°C |
Overtravel: | 0.138" (3.5mm) |
Differential Travel: | 0.020" (0.5mm) |
Pretravel: | 0.060" (1.5mm) |
Release Force: | 500gf |
Operating Force: | 1500gf |
Features: | -- |
Series: | VB |
Termination Style: | Screw Terminal |
Mounting Type: | Chassis Mount |
Actuator Type: | Bevel Plunger |
Voltage Rating - DC: | 125V |
Voltage Rating - AC: | 125V |
Current Rating: | 10A (AC), 600mA (DC) |
Switch Function: | On-Mom |
Circuit: | SPDT |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VB-4141 Application Field and Working Principle
The VB-4141 is a mechanically-actuated limit switch designed for applications requiring a snap action, limit switch. This switch is typically used to detect the presence or absence of an object such as an end-of-line, a part-for-recognition or for maintaining a preset limit. The switch is mechanically actuated, requiring a mechanical connection, to open and close switching contacts.
Applications
The VB-4141 is typically used in the following applications:
- End of line signal detection
- Permanent or portable signal monitoring
- Part recognition
- Limit signal control
- Automatic operation control
Operation Principle
The VB-4141 is designed to operate with a constant external force applied to actuate the switch. This external force is supplied by spring-biased plungers, as shown in the figure below, which are usually connected to the target object. When the plunger is pushed in, it pushes the actuator shaft assembly, which is attached to a contact arm. The contact arm then moves the contact arm over the switch contact, where the contact arm will close the contact.
The switch is designed to provide an audible “click” sound when the switch is actuated. This sound indicates that the switch has successfully closed its contacts and that the external force has been applied. The switch is mechanically biased such that it stays closed unless an external force is applied.
Features
The VB-4141 has a variety of features, some of which are listed below:
- Spring-biased plunger actuation
- Audible “click” sound
- Robust and reliable construction
- Wide range of sizes and models available
- Variety of materials available
Conclusion
The VB-4141 is a mechanically-actuated limit switch designed for applications requiring a snap action, limit switch. This switch is typically used to detect the presence or absence of an object such as an end-of-line, a part-for-recognition or for maintaining a preset limit. The switch is designed to provide an audible “click” sound when the switch is actuated. The VB-4141 has a variety of features, some of which include a spring-biased plunger actuation, robust and reliable construction, and variety of sizes and models.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V