VBO19-08NO7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers, such as VBO19-08NO7, are important components in any electrical system. They are used to convert alternating current (AC) to direct current (DC), enabling various devices and equipment to draw power from a source. An automotive alternator is one example: it generates AC power and relies on a bridge rectifier to provide the power for the car’s battery and other systems.

VBO19-08NO7 is a Bridge Rectifier that offers dual-phase-motor-start and features a 120-degree phase difference. It is made up of four semiconductor diodes connected in a closed loop, with two diodes directly connected in parallel across the AC line and two others connected in series. The four diodes are wired in such a way that when the AC current is passed through the bridge, it is converted to DC.

A bridge rectifier works by providing a single, low-impedance path for the AC current to travel. When an AC current is passed through the rectifier, the current alternates in direction through the two diodes connected in series. The two diodes connected in parallel form a continuous loop, allowing current to flow continuously in only one direction.

A bridge rectifier can be used to regulate or control the amount of current in circuits. This is done by placing a resistor or capacitor in series with the rectifier to limit the amount of current flowing through the circuit. By controlling the amount of current, the bridge rectifier can be used to regulate the voltage level in the circuit.

In addition to regulating the current, VBO19-08NO7 also provides over-current protection. This is done by monitoring the output current and turning off the device if the current exceeds a certain limit. This helps to ensure the safety of the device and prevent it from over-heating or drawing too much current.

VBO19-08NO7 also offers a wide range of applications, including in power systems, motor control, and audio equipment. In power systems, it can be used to provide a stable DC power supply, while in motor control, it can provide a steady start and stop sequence for the motor. In audio equipment, it can be used to filter out the high-frequency components of the audio signal for improved sound quality.

In summary, VBO19-08NO7 is a bridge rectifier that provides a single, low-impedance pathway for AC current and converts it to DC. It can be used to regulate current and voltage, as well as provide over-current protection. It also has many applications in different areas, including power systems, motor control, and audio equipment.

The specific data is subject to PDF, and the above content is for reference